228-65010-58
LC-20Ai Inert HPLC Pump
The LC-20Ai pump is a fully inert, biocompatible pump for use in applications which require a metal-free flow path. The LC-20Ai pump uses a tandem dual-piston design for accurate and reproducible flow rates up to 30 MPa (~4400 psi) and can be used in a HPGE configuration for gradient delivery and solvent blending.
Similar to the LC-20AT pump in design but with a metal free flow path. Not compatible with low pressure gradient formation (no LPGE), specify as binary pump system for gradient operation. 0.001-10 mL/min flow rate, 30 MPa pressure tolerance up to 5 mL/min (22 MPa at >5 mL/min).
Black color.
228-45568-42
Automatic Rinsing Kit, LC-20Ai
This kit is used for continuously automatically rinsing the rear section of the plunger seal on the LC-20Ai by using a rinse pump and rinse solution. Useful when using buffer solutions high in salt concretations. Can also be used together with the automatic rinsing bottle kit, 228-61067-91.
228-65106-58
SIL-20AC HPLC Autosampler
High speed, temp controlled (4-40°C), low carryover autosampler for analytical HPLC. Needle in the flow path design and advanced materials eliminate carryover. PEEK valve, 20 MPa pressure limit.
Standard rack holds 105 1.5 mL vials. Optional racks sample capacities: 175 1 mL; 70 2 mL; 50 4 mL, 2 MTP (STD 96, DW 96, or STD 384); Control Rack 10 2 mL vials; 0.1 to 100 μL inj vol. Black front panel.
228-65310-58
CDD-10Avp Conductivity Detector
The CDD-10Avp is a conductivity detector for analysis of organic acids and charged species such as cations and anions in water samples, amino acids, etc. Offers excellent sensitivity with a wide dynamic range for both low and high level concentrations. Requires CTO-40S or CTO-40C for flow cell temperature control.
Flow cell must be mounted in the CTO-40 column oven to maintain temperature stability. A low-pulsation pump (LC-40D or LC-20AT with pulse dampening) is required.
228-74020-41
ICDS-40A Starter Kit
Modification kit for the CDD-10Avp to outfit it with a ICDS-40 electrolytic suppressor. Requires installation by a Shimadzu Service Engineer.
Modification kit for the CDD-10Avp to outfit it with a ICDS-40 electrolytic suppressor. Requires installation by a Shimadzu Service Engineer. Includes suppressor, suppressor power supply, and suppressor piping kit.
228-37616-92
Sample rack for 4 mL vials, SIL-20A/AC, SIL-30AC
Capacity of 50 mL vials.
Insulated metal rack for SIL-20A/AC.
228-65312-58
SPD-40 UV Detector
The SPD-40 UV detector is a dual wavelength UV-Vis detector with a wavelength range of 190-700 nm. The standard temperature controlled flow cell coupled with noise reduction and optical processing technologies result in extremely low noise and a greatly extended linear range.
Includes temperature controlled flow cell (ambient + 5°C) to 50°C; 10 mm path length standard cell; linear to 2.5 AU. Optional flow cells UHPLC, semi-micro, inert, and preparative applications are available.
220-91413-04
1L HDPE Bottle Set with 3-Hole Caps (6/pk)
Set of 6 1L HDPE bottles recommended for Ion Chromatography analysis. Includes 3-hole caps for connection to the LC system, with a filter plug and solid plug to vent the bottle and prevent dust and debris from contaminating the mobile phase. Polypropylene caps are also included for solvent storage when not in use.
220-91428-00
PEEK Tubing Kit For HPLC Installs
This kit includes Blue (0.010" i.d.) and Red (0.005" i.d.) PEEK tubing (two 5 ft rolls of each color) and 2 lengths of one-piece fingertight fittings for HPLC installation convenience. Also included are a PEEK tubing cutter, 2 PEEK unions, PEEK column plugs, and spare nuts and ferrules for the DGU-20A3 or A5 degassers.
This kit includes Blue (0.010" i.d.) and Red (0.005" i.d.) PEEK tubing (two 5 ft rolls of each color) and 2 lengths of one-piece fingertight fittings for HPLC installation convenience. Also included are a PEEK tubing cutter, 2 PEEK unions, PEEK column