1020166 2 NIPPLE,SS,3/8BSPP-NPT
1020167 2 BARB,BRASS,3/8NPT
1021406 1 Water Damper
4022 297 06181 5 8 mm Poly Tubing
4035 273 22521 1 Power strip, 6 out 220 IEC type
4035 273 43491 1 Chloramine-T algae (250 gram jar)
9425 061 69458 1 Auto Transformer 208 V to 228 V 7 KVA
9425 061 69549 1 10 pack DVD+R x 10 - 4.7 GB Disks
9425 061 69585 2 50 ft. each - 3/8 inch Air Hose
9425 061 69586 8 Hose Clamps, Size 08
9425 061 69587 2 Brass Reducer $ 1/2 $ NPT - 3/8"NPT,
9425 061 69588 2 Brass Hose Barbs 3/8" NPT to 3/8" Hose
9425 061 69589 1 20 A, 250 V Twist Lock Plug, Hubbell
9425 061 69590 2 $ 1/2" $ KO Cable Clamp, Thomas & Betts
9425 061 69617 4 IEC Power cords, 6 ft.
Choose a Chiller Type – air or water cooled
9425 031 90501 1 Haskris RO33 Air Cooled Water Chiller
9425 031 90511 1 Haskris RO33 Water Cooled Water Chiller
An integrated Plasma cleaner helps to ensure that the specimen surface stays clean. Its integration allows for a direct access through the user interface to two cleaning modes: chamber cleaning, and a mild specimen surface cleaning. The removal of hydrocarbon contaminants is of particular importance when operating at low kV for true surface imaging,
This option is available for Apreo, VolumeScope, Quattro and Prisma E.
Specifications of the 24" Widescreen LCD monitor:
Display: 61.1 cm (24.1 inch) 0.270 mm dot pitch, 300 cd/m² 1000:1 contrast ratio <16 ms response time Resolution: 1920 x 1200 at 60 Hz refresh rate (optimum)
Manual User Interface (MUI) is a supplementary control console providing direct manual control of microscope parameters such as focus, magnification, contrast, brightness, beam shift and stigmator.
Remote Control / Imaging is a Remote Control package that enables full control of the microscope via another computer across a network. The imaging transfer speed and the remote system responsiveness is determined by the speed and quality of the network connection. 100 Mbps LAN connection is sufficient for most use cases.
The Remote Control / Imaging package contains a perpetual license for the Radmin Remote Control software, which is compatible with all Windows OS versions available on the Microscope and Support computers.