26823 NRTL Field Labeling

Third party electrical safety assessment and field labeling by a Nationally Recognized Testing Laboratory (NRTL) at the Customer's site.

FP 3440/52 Acoustic Enclosure for Pre-vacuum Pump

The acoustic enclosure is a cover that fits the pre-vacuum pump(s) of the microscope system. It provides noise dampening of the pump(s) for operator and microscope.

Please note that this part number (FP 3440/52) is not suitable for the Edwards XDS35i vacuum pump.

9432 909 96411 Compressor 120 V, 60 Hz with 4-liter Tank

The compressor is required when compressed air of 6 atm. is not available; compressed air is required for operating pneumatic valves and the microscope's leveling system. The compressor is connected to the mains supply unit of the microscope.

1050312 Advanced Signal Selection

The option Advanced Signal Selection includes a multiplexer that permits the simultaneous detection of signals from all detectors, and all segments of all detectors. It is automatically selected when the detector configuration requires it.

1091077 Retractable STEM 3+ Detector

The Retractable STEM 3+ Detector enables scanning transmission imaging in bright-field, dark-field and high-angle dark-field modes. This STEM 3+ detector has eleven individual channels: a bright-field segment, four concentric dark-field segments, and six high-angle, dark-field (HADF) segments. With the Retractable STEM 3+ Detector there is no need to vent the chamber for inserting or removing the detector. The detector includes a row holder that can hold up to six TEM grids and that is compatible with the standard system holder. It also includes the load base.

This Retractable STEM 3+ Detector is suitable for Apreo and VolumeScope. It requires the presence of the Solid-State Detector Integration Kit (1077075) and Advanced Signal Selection (1050312). With support of signals from up to twelve channels, it is possible to sum the available signals from the bright-field segment, selectable dark-fields and selectable high-angle, annular dark-fields segments.

1120429 Solid-state Detector Integration Kit

The Solid-state Detector Integration Kit is required to enable interfacing with one or more solid-state detectors such as the STEM, DBS and GAD detectors. It allows having all three solid-state detectors connected simultaneously and provides support for up to twelve signal channels. This allows access to all solid-state detector segments.

4022 404 41230 Installation Labor Apreo 2 S LoVac NA

Installation Labor Apreo 2 S LoVac NA

4022 404 02230 Installation Material Apreo 2 S LoVac NA

Installation Material Apreo 2 S LoVac NA

4022 404 43230 Warranty Labor Apreo 2 S LoVac NA

Warranty Labor Apreo 2 S LoVac NA

4022 404 04230 Warranty Material Apreo 2 S LoVac NA

Warranty Material Apreo 2 S LoVac NA

9425 061 69515 NA Installation Kit for Quanta (3D) FEG / Nova NanoSEM / Verios / Versa 3D / Scios / Teneo

Part Number Qty SSD Supplied items

25066 1 External 10-inch water filter kit

1001224 1 Specimen stubs (20)