Software options

3D reconstruction and image analysis software; Amira Software for Life Sciences

Thermo Scientific AutoScript ™ 4 Software: Python-based application programming interface

TopoMaps for image colorization, image analysis, and 3D surface reconstruction

Advanced image analysis software

Remote control software

Documentation

Operating instructions handbook

Online help

Prepared for RAPID (remote diagnostic support)

Free access to online resources for owners

Warranty and training

Choice of service maintenance contracts

Choice of operation / application training contracts

Consumables

Aperture strips for electron columns

Diamond knife from external supplier (Diatome) for Volumescope System

Installation requirements

Earth resistance <0.1 Ω

Environment:

  • Temperature (20+ 3)°C
  • Relative humidity below 80%
  • Stray AC magnetic fields <40 nT asynchronous, <100 nT synchronous for line times, 20 ms (50 Hz mains) or 17 ms (60 Hz mains)
  • Minimum door size: 0.9 m wide × 1.9 m high
  • Weight: column console 980 kg
  • Dry nitrogen recommended for venting
  • Compressed air 4–6 bar, clean, dry and oil-free
  • System chiller
  • Acoustics: site survey required, as acoustic spectrum relevant
  • Floor vibrations: site survey required, as floor spectrum relevant
  • Optional active vibration isolation table
  • Maps Software for automatic large-area acquisition using tiling and stitching; correlative work
  • Online user guidance
  • 1-year warranty
  • Replacement Schottky electron source module
  • Power:
  • Voltage 100–240 V AC (-6%, +10%)
  • Frequency 50 or 60 Hz (+1%)
  • Consumption: <3.0 kVA for basic microscope

Learn more at thermofisher.com/apreo

For research use only. Not for use in diagnostic procedures. For current certifications, visit thermofisher.com/certifications © 2021 Thermo Fisher Scientific Inc. All rights reserved. All trademarks are the property of Thermo Fisher Scientific and its subsidiaries unless otherwise specified. DS0373-EN-12-2021

thermo scientific