Software options
3D reconstruction and image analysis software; Amira Software for Life Sciences
Thermo Scientific AutoScript ™ 4 Software: Python-based application programming interface
TopoMaps for image colorization, image analysis, and 3D surface reconstruction
Advanced image analysis software
Remote control software
Documentation
Operating instructions handbook
Online help
Prepared for RAPID (remote diagnostic support)
Free access to online resources for owners
Warranty and training
Choice of service maintenance contracts
Choice of operation / application training contracts
Consumables
Aperture strips for electron columns
Diamond knife from external supplier (Diatome) for Volumescope System
Installation requirements
Earth resistance <0.1 Ω
Environment:
Temperature (20+ 3)°C
Relative humidity below 80%
Stray AC magnetic fields <40 nT asynchronous, <100 nT synchronous for line times, 20 ms (50 Hz mains) or 17 ms (60 Hz mains)
Minimum door size: 0.9 m wide × 1.9 m high
Weight: column console 980 kg
Dry nitrogen recommended for venting
Compressed air 4–6 bar, clean, dry and oil-free
System chiller
Acoustics: site survey required, as acoustic spectrum relevant
Floor vibrations: site survey required, as floor spectrum relevant
Optional active vibration isolation table
Maps Software for automatic large-area acquisition using tiling and stitching; correlative work
Online user guidance
1-year warranty
Replacement Schottky electron source module
Power:
Voltage 100–240 V AC (-6%, +10%)
Frequency 50 or 60 Hz (+1%)
Consumption: <3.0 kVA for basic microscope
Learn more at thermofisher.com/apreo
For research use only. Not for use in diagnostic procedures. For current certifications, visit thermofisher.com/certifications
© 2021 Thermo Fisher Scientific Inc. All rights reserved. All trademarks are the property of Thermo Fisher Scientific and its subsidiaries unless otherwise specified. DS0373-EN-12-2021