You should avoid treated lumber in garden beds. Most wood treated before January 2004 was treated with chromatid copper arsenate (CCA), which can leach into soils (more chromium, copper, and arsenic from CCA will leach into acidic soils and soils with high organic matter content). Chromium and copper are usually not considered a problem because they bind very strongly to soil particles, so only very small amounts of these metals are absorbed by plants. In addition, plants are more sensitive to chromium and copper than humans and any affected plants will die before they absorb enough chromium or copper to be harmful to a human who eats them. However, arsenic is bound less strongly by the soil so it is more mobile and can be absorbed by plants easily. Arsenic is also harmful to humans at lower levels than chromium and copper. Scientific studies do not agree on how far these chemicals can move from treated lumber sources or how much can be absorbed by plants. conflicting.
If you use treated lumber, you should cover the lumber with heavy plastic to prevent it from having direct contact with the soil. In addition, manage the garden soil to minimize leaching into the soil and be sure that plants, especially root crops, are planted at least 12 inches from treated lumber.
Since January 2004, other compounds have been used to treat lumber. These new compounds do not contain arsenic so they do not pose the same risks as CCA. The most commonly used compounds for treating lumber are alkaline copper quaternary ammonium (ACQ), which contains no chemicals considered toxic by the EPA, and copper azole (CA), which has two formulations, both with a negligible impact on the environment. These compounds are copper-based; therefore, they are less mobile in the soil and pose a much lower risk for plant uptake and human consumption. They also contain a fungicide, which is used on agricultural crops. Both of these should still be avoided if you want to meet the standards of the National Organic Program.
environment. These compounds are copper-based; therefore, they are less mobile in the soil and pose a much lower risk for plant uptake and human consumption. They also contain a fungicide, which is used on agricultural crops. Both of these should still be avoided if you want to meet the standards of the National Organic Program.
There are a number of naturally decay resistant woods that can be used for raised beds. Some of these may not be readily available for purchase and others are quite expensive. Old-growth wood, or wood from an area that has never been harvested, can be more resistant than second-growth wood, possibly because of differences in the rate of growth in these to forest types. How decay-resistant these woods are depends on environmental factors, such as moisture availability, soil conditions, and climate. Starred species have conflicting assessments of durability.
Exceptionally resistant: black locust, red mulberry, Osage orange, Pacific yew.
Resistant or very resistant: old-growth bald cypress, catalpa, eastern or western red cedar, black cherry, chestnut, juniper, honey locust, white oak, old-growth redwood, sassafras, and black walnut*.
Moderately resistant: second-growth bald cypress, Douglas fir, eastern or western larch, old-growth eastern white pine, some varieties of old-growth pine*, second-growth redwood.
“Garden Use of Treated Lumber,” Environmental Soil Issues. Pennsylvania State University. Available at:
Garden Use of Treated Lumber, Environmental Soil Issues. Pennsylvania State University. Available at: https://extension.psu.edu/environmental-soil-issues-garden-use-of-treated-lumber. Accessed August 27, 2019. “IPPC,” Food and Agriculture Organization of the United Nations. Available at https://www.ippc.int/en/. Accessed August 27, 2019. International Standards for Phytosanitary Measures No. 15 Regulation of Wood Packaging Material in International Trade. 2009. Food and Agriculture Organization of the United Nations. Available at: https://www.ippc.int/largefiles/adopted_ISPMs_previousversions/en/ISPM_15_2009_En_2009-04-23.pdf. Accessed August 27, 2019. Leblanc, R. 2019. Pallet Markings: What do they Mean?/ The Balance Small Business available at https://www.thebalancesmb.com/pallet-markings-what-do-they-mean-2878162. Accessed August 27, 2019. Platten W.E., T.P. Lucxton, T. Gerke, S. Harmon, N. Sylvest, K. Bradham, and K. Rogers. 2014. Release of Micronized Copper Particles from Pressure-treated Wood Products. U.S. Environmental Protection Agency, Washington, DC, EPA/600/R-14/365. Scheffer, T.C. and J.J. Morrell. 1998. Natural Durability of Wood: A Worldwide Checklist of Species. Forest Research Laboratory, Oregon State University. Research Contribution 22. Available at: http://www.w.crforest.com/NewAg/downloads/RC22.pdf. Accessed August 27, 2019. Wilson, A. “Naturally Rot-Resistant Woods,” The National Gardening Association Learning Library available at https://garden.org/learn/articles/view/977/. Accessed August 27, 2019.
KYSU.EDU/AG @KYSUAG
Educational programs of Kentucky Cooperative Extension serve all people regardless of economic or social status and will not discriminate on the basis of race, color, ethnic origin, national origin, creed, religion, political belief, sex, sexual orientation, gender identity, gender expression, pregnancy, marital status, genetic information, age, veteran status, or physical or mental disability. Kentucky State University, University of Kentucky, U.S. Department of Agriculture, and Kentucky Counties, Cooperating. 2019