A+ Capable options indicated by this color background.
Ordering Information EXAMPLE: DSX1 LED P7 40K T3M MVOLT SPA NLTAIR2 PIRHN DDBXD
DSX1 LED
Series LEDs Color temperature Distribution Voltage Mounting
D T15 Type I short T5VS Type V very short2 MVOL4 Shipped included
T25 Type II short T5S Type V short2 1205 SPA Square scale accounting
T2M Type II medium T5M Type V medium2 2085 RPA Round pole mounting
T3S Type II short T5W Type V wide2 2405 WBA Wall bracket2
T3M Type II medium BLC Back light control3 2775 SPUMBA Square scale universal mounting adaptor4
T4M Type IV medium LCO Left corner cutoff5 3475 RFUMBA Round pole universal mounting adaptor5
TFTM Forward throw RCOO Flitch come 'cuo'5 4805 Shipped separately KMAS DDBXD U Mest arm mounting bracket adaptor (specify 'first')
Control options Other options Finish
Shipped installed PIR High flow, motion/ambient sensor, 8-15° mounting height, ambient sensor enabled at 5K16,17 Shipped installed DDBXD Dark bronze
NLTAIR2 r Light air generation 2 enabled8 PIRH High flow, motion/ambient sensor, 15-30° mounting height, ambient sensor enabled at 5K16,17 HS - mouse size shirk18 DBLXD Black
PIRHN Network high flow control/mb on sensor9 SF Single fuses (170, 777, 347V)5 DNAXD Natural alum num
PER NFMA twist-lock receptacle only (control vs. cinered sepext)10 PIRF3V High flow, motion/ambient sensor, 8-15° mounting height, ambient sensor enabled at 1K16,17 DF Double fuses (728, 240, 480V)5 DVHXD White
PERS Five-pin receptacle only (control vs. cinered sepext)10,11 L90 - left rotated optics1 DDBTXD Textured dark bronze
PER7 Seven-pin receptacle only (control vs. cinered sepext)10,1 PIRH1FCV B-level, motion/ambient sensor, 15-30° mounting height, ambient sensor enabled at 1K16,17 R90 - right rotated optics1 DLBBXD Textured black
DMG 0-10% dimming wires pulled outside fixture (for use with an external control, ordered separately)11 EAO Field ac/stable output15 Shipped separately BS 3rd spikes18 DNATXD Textured natural alum num
DS Dual swill-ting10,14,15 EGS - external glare shied DVHGXD Textured white
One Lithonia Way • Coryers, Georgia 30012 • Phone: 1-800-705-SERV (7378) • www.lithonia.com © 2011 2020 Aouity Brands Lighting, Inc. All rights reserved. DSXI-LED rev. 01/20/20
COMMERCIAL O.ITDOOR Page 1 of 8
Specificationsspecifier's every wall-mounted lighting need in a widely accepted shape that blends with any architecture. The clean rectilinear design comes in four sizes with lumen packages ranging from 1,200 to 25,000 lumens, providing a true site-wide solution. Embedded with nLight\circledR AIR wireless controls, the WDGE family provides additional energy savings and code compliance.
Depth (D1):10*
Depth (D2):2*
Height:9*
Width:25*
Weight: (without options)30.5 lbs
WDGE LED Family Overview
Luminaire Standard EM, 0°C Cold EM, -20°C Sensor Lumens (4000K)
P1 P2 P3 P4 P5 P6
WDGE1 LED 4W -- -- 1,200 2,000 -- -- -- --
WDGE2 LED 10W 18W Standalone / nLight 1,200 2,000 3,000 4,500 6,000 --
WDGE3 LED 15W 18W Standalone / nLight 7,500 8,500 10,000 12,000 -- --
WDGE4 LED -- -- Standalone / nLight 12,000 16,000 18,000 20,000 22,000 25,000
EXAMPLE: WDGE4 LED P3 40K 70CRI R3 MVOLT SRM DDBXD
SeriesPackageColor TemperatureCRIDistributionVoltageMounting
WDGE4 LEDP1P430K 40K 50K3000K 4000K 5000K70CRI 80CRIR2 R3 R4 RFTType 2 Type 3 Type 4 Forward ThrowMVOLT 347° 480°Shipped included SRM ICW Washer bracket (dry) damp locations only)
P2 P3P5Shipped separately AWS PBBW
3/8inch Architectural wall space Surface-mounted back box (trip, left, right)
OptionsFinish
PE2Photocell, Button TypeStandalone Sensors/ControlsDDBXDDark bronze
DS3Du.a switching (scores with 2 drivers and 2 light engines)PIR3i-level (150/35%) motion sensor for 8-15° mounting heights. Incidence: for use on switches; circuits with external dusk to cowr switching.DBLXDB ack
DMG40-10V drinning wires put led outside fixture (for use with an external control, ordered sepa ately)PIRH3i-level (150/35%) motion sensor for 15-30° mounting heights. Intended "or use or switched circuits with external dusk to cowr switchingDNAXDNatural ail.min um
BCEBction cord lit entry or back box (PSRW). Total of 4 entry points.PIR1FC3V3i-level (100/35%) motion sensor for 8-15° mounting heights with photocell pre-programmed for dusk to dawn operation.DWHXDWhite
SPD10KV10kV Sluge packPIRH1FC3V3i-level (100/35%) motion sensor for 15-30° mounting heights with protocol one-programmed for dusk to dawn operation.DSSXDSardstone
BAABuy A nerice (in' Act Comp lent)Networked Sensors/ControlsDDBTXDTextured cart bronze
NLTAIR2 PIRLightAir Wireless enabled bi-level motion/ambient sensor for 8-15° mounting heights.DBLBXDlextured black
NLTAIR2 PIRHLightAir Wireless enabled bi-level motion/ambient sensor for 15-30° mounting heights.DNATXDTextured r acural aluminium
See page 3 for out of box functionalityDWHGXD
WDGE45 DBXD
WDGE4FBBW DOEXD U
AccessoriesNOTES
Ordered and shipped separately1 347V and 480V not available with DS.
WDGE 3/5inch Architectural Wall Space (specify finish)2 PE not available in 480V and with sensors/controls.
3 DS and DMG not available with sensors/controls.
WDGE4 surface-mounted back box (specify finish)4 Not qualified for DLC. Not available with emergency battery backup.
LITHONIA LIGHTING. COMMERCIAL OUTDOOR One Lithonia Way • Conyers, Georgia 30012 • Phone: 1-800-705-SERV (7378) • www.lithonia.com WODGE4 LED © 2019-2022 Acuity Brands Lighting, Inc. All rights reserved. Rev. 01/18/22
Introduction
The WPX LED wall packs are energy-efficient, cost-effective, and aesthetically appealing solutions for both HID wall pack replacement and new construction opportunities. Available in three sizes, the WPX family delivers 1,550 to 9,200 lumens with a wide, uniform distribution.
The WPX full cut-off solutions fully cover the footprint of the HID glass wall packs that they replace, providing a neat installation and an upgraded appearance. Reliable IP66 construction and excellent LED lumen maintenance ensure a long service life. Photocell and emergency egress battery options make WPX ideal for every wall mounted lighting application.
Front View Side View
Luminaire Height (H) Width (W) Depth (D) Side Conduit Location Weight WPX1 8.1" (20.6 cm) 11.1" (28.3 cm) 3.2" (8.1 cm) 4.0" (10.3 cm) 0.6" (1.6 cm) 6.1 lbs (2.8 kg) WPX2 9.1" (23.1 cm) 12.3" (31.1 cm) 4.1" (10.5 cm) 4.5" (11.5 cm) 0.7" (1.7 cm) 8.2 lbs (3.7 kg) WPX3 9.5" (24.1 cm) 13.0" (33.0 cm) 5.5" (13.7 cm) 4.7" (12.0 cm) 0.7" (1.7 cm) 11.0 lbs (5.0 kg)
Ordering Information
EXAMPLE: WPX2 LED 40K MVOLT DDBXD
SeriesColor TemperatureVoltageOptionsFinish
WPX1 LED P11,350 Lumens, 1TW130K 3200KM/VLT 120V - 277V(blank)NoneDDBXD Dark bronze
WPX1 LED P22,900 Lumens, 24W40K 4000K347 34/V3E4WHEmergency battery backup, CEC compliant (4W, DPC min)2DW/HXD White
WPX2 LED6,000 Lumens, 4/W50K 5000KE14WCEmergency battery backup, CEC compliant (14W, -20°C min)3DBLXD Back
WPX3 LED9,200 Lumens, 69WPEPhotoce1Note: For other options, consult factory.
Note: The lumen output and input power shown in the ordering tree are average representations of all configuration options. Specific values are available on request.
1. All WPX wall packs come with 6kV surge protection standard, except WPX1 LED P1 package which comes with 2.5kV surge protection standard. Acid SPD6KV option to get WPX1 LED P1 with 6kV surge protection. Sample nomenclature: WPX1 LED P1 40kV MVOLT SPD6KV DDEXD 2. Battery pack options only available on WPX1 and WPX2. 3. Battery pack options not available with 347V and PE options.
FEATURES & SPECIFICATIONS
INSTALLATION
INTENDED USE The MPX LED wall
WPX ca- be mounted directly over a standard electrical junction box. Three 1/2 inch concul ports on three sides allow for s-face conduit wiring. A port on the back surface allows poko-through conduit wiring on surfaces that can't have an electrical junction box. Wiring can be made in the integral wiring compartment (i-ci cases). WPX is only tocom-mended for installations with EDs facing downwards.
The WPX LED wall packs are designed to provide a cost-effective, e-ergy-eff client solution for the one-for-one replacement of existing -1 D wall packs. The WPX, WPX2 and WPX3 are ideal for replacing up to 150W, 250W, and 400W Hs) lumi-a res respectively WPX luminaires deliver a uniform, wide distribution. WPX is rated for -40°C to 43°C.
CONSTRUCTION WPX feature a die-ca
WPX features a die-cast aluminum main body with a thermal management that both enhances (11.1) efficacy and exite-ds component life. The lumi-aires are 11'65 rated, and sealed against moisture or environmental contaminants.
LISTINGS CSA Certified to meet U.S. and Canadian standards. Suitable for wet locations. IP56 Re.d. DesignLights Co-sortium® (DLC) qualified product. Not all versions of this product may be DLC qualified. Please check the DLC Qualified Products List as: www.deslard.com/DLP, to confirm which versions are qualified. International Dark Sky Association (DA) Fixture Seal of Approval (FSA) is available for all products on this page utilizing 3000K color temperature only. WARRANTY 5-year limited warranty. This is the only warranty provided and no other statements in this specification sheet create a any warranty of any kind. All other express and implanks are disclaimed. Complete warranty terms located at: www.aurybrands.com/customers/aury/terre_and_conditions.asp Note: Actual performance may differ as a result of one user environment application. All values are design or policy values, measured under laboratory conditions as 25°C. Specifications subject to change without notice.
Light ongoing) co-figuration consists of high-efficacy LEDs and LED 1000V and 1000W LEDs. The main maintenance of L90/00, 1000 hours, color temperature (CCT), options of 3000K, 4000K and 5000K with minimum CRI of 70. Electronic drivers ensure system power fccor >90% and THD <20%. All luminaires have 6V surge protection (Note: WPXL LED P1 package comes with a star-dard surge protection at 1000V and 1000W). It can be ordered with an optional 6V surge protection. All photocell (PS) operates on a MVOLT (120V - 277V) input. Note: The standard WPXL LED wall pack luminaires come with field-adjustable drive current feature. This feature allows tuning the output current of the LED drivers to adjust the L, main output to the dim the L, main rate.
One Lithonia Way • Coryers, Georgia 30012 • Phone: 1-800-705-SSTRV (7378) • www.lithonia.com WPX LED © 2020-2022 Acuity Brands Lgh:ing, Inc. All rights reserved. Rev. 03/08/22
COMMERCIAL OJTDOOR
FEATURES & SPECIFICATIONSCatalog Number
INTENDED USE — Square straight aluminum general purpose pole for up to 35 foot mounting heights, CONSTRUCTION — Shaft: Made from extruded 6063-T6 or 6061-T6 aluminum alloy, square tube is uniform in cross-section down length of shaft with no taper.Notes
Hand hole: Reinforced rectangular hand hole is located 18" above base, 4" poles have 2" x 4" hand hole; 5" and 6" poles have 2.5" x 4" hand hole). Hand-hole cover plate made from aluminum alloy.Type
Hardware: Stainless steel
Top cap: Removable top cap provided with drill-mount poles.
Bolt covers: Nut cover discs provided. Optional cast aluminum base cover available.
FINISH — Must specify finish.
GROUNDING — Provision located inside hand hole rim. Grounding hardware is not included (provided by others).
ANCHOR BOLTS — Fabricated from carbon steel bar with minimum-yield strength of 55,000 psi. Upper portion of anchor bolt is galvanized per ASTM A-153. Each anchor bolt is furnished with two hex nuts and two flat washers.Anchor Base Poles Image SQUARE STRAIGHT ALUMINUM
WM3-FT WALL MOUNTED LIGHT DETAILS NTS
WM WALL MOUNTED LIGHT DETAILS
ORDERING INFORMATION Lead times will vary depending on options selected. Consult with your sales representative.
Example: SSA 20 4CDM19 BA
Series
SSA
Nominal fixture mounting heightNominal shaft base size/wall thicknessMounting1OptionsFinish10
8 - 35 feet (See back page.)(See back page.)Tenon mountingShipped installedStandard colors
PT 0pen topL/AB Less anchor boltsDDB Dark bronze
T20 2-3/8" 0.D. (2" NPS)FBC Full base coverDWH White
T25 2-7/8" 0.D. (2-1/2" NPS)VD Vibration damperDBL Black
T30 3-1/2" 0.D. (3" NPS)2TP Tamper proofDMB Medium bronze
T35 4" 0.D. (3-1/2" NPS)2H1-18Axx Horizontal arm bracket (1 fixture)2DNA Natural aluminum
Drill mounting2FDLxx Festoon outlet less electrical2BA Brushed aluminum
DM19 1 at 90°CPL12xx 1/2" coupling2Classic colors
DM28 2 at 180°CPL34xx 3/4" coupling2DSS Sandstone
DM28PL 2 at 180° with one side pluggedCPL1xx T" coupling2DGC Charcoal gray
DM29 2 at 90°NPL12xx 1/2" threaded nipple2DTG Tennis green
DM39 3 at 90°NPL34xx 3/4" threaded nipple2DBR Bright red
DM49 4 at 90°NPL1xx T" threaded nipple2DSB Steel blue
CSX/DSX/AERS/OMERO/Drill mounting2EHHxx Extra handhole2Class 1 architectural anodized
DM19AS 1 at 90°MAEX Match existing8ABL Black
DM28AS 2 at 180°USPOM United States point of manufacture8ADB Dark bronze
DM29AS 2 at 90°ANA Natural
DM39AS 3 at 90°Architectural colors (powder finish)10
DM49AS 4 at 90°
AERIS/Suspend drill mounting1,4
DMxxAST_
OMERO/Suspend drill mounting1,4
DMxxMRT_
CROSS SECTION / ELEVATION
DECIDUOUS TREE PLANTING DETAIL NTS NOTE: WIRE BASKETS ARE TO BE REMOVED PRIOR TO BACKFILLING THE PLANTING PIT
CROSS SECTION / ELEVATION
EVERGREEN TREE PLANTING DETAIL NTS NOTE: WIRE BASKETS ARE TO BE REMOVED PRIOR TO BACKFILLING THE PLANTING PIT
CROSS SECTION/ELEVATION SEE PLANTING NOTES FOR ADDITIONAL REQUIREMENTS
3033 30101111
SHRUB PLANTING DETAIL NTS
PLANTING NOTES
Plant material shall be furnished and installed as indicated; including all labor, materials, plants, equipment, incidentals, and clean up.
The Contractor shall be responsible for planting at correct grades and alignment.
Plants shall be typical of their species and variety; have normal growth habits; well-developed densely foliated branches, an abundant root system and be free from defects and injuries.
Contractor shall report any soil or drainage conditions considered detrimental to the growth of the plant material.
All plant material shall be guaranteed by the Contractor to be in vigorous growing condition. Provision shall be made for a growth guarantee of at least two (2) years for trees and shrubs. Replacements shall be made at the beginning of the first succeeding planting season. All replacements shall have a guarantee equal to that stated above.
Insofar as it is practical, plant material shall be planted on the day of delivery. In the event this is not possible, the Contractor shall protect the plant material not planted from drying. Plants shall not remain unplanted for longer than a three (3) day period after delivery.
Quality and size of plants, spread of roots, and size of balls shall be in accordance with ANSI Z60.1 (Rev. 2014) "American Standard for Nursery Stock" as published by the American Horticultural Industry Association d/b/a AmericanHort.
All plants shall be planted in topsoll that is thoroughly watered and tamped as backfilling progresses. Nothing but suitable topsoll, free of dry sod, stiff clay, litter, etc., shall be used for planting.
Plants shall not be bound with wire or rope at any time so as to damage the bark or break branches. Plants shall be handled from the bottom of the ball only.
Planting operations shall be performed during periods within the planting seasons when weather and soil conditions are suitable and in accordance with accepted local practices. Planting seasons are defined as "Spring Planting Season" March 15 through May 15, "Fall Planting Season" Sept. 15 through Nov. 15. Planting is acceptable during other months if weather permits, the ground is not frozen and supplemental watering is provided in the summer.
No plant, except ground covers, shall be planted less than two (2) feet from existing structures and sidewalks.
Street trees shall be field adjusted to be a minimum distance of 15' from proposed street lighting.
Set all plants plumb and straight. Set at such level that, after settlement, a normal or natural relationship to the crown of the plant with the ground surface will be established. Locate plants in the center of the pit.
Top pruning should be restricted to removing broken and damaged branches and developing a good tree structure. Main leader of trees must not be cut back. All pruning shall be done at the nursery prior to transplanting or transporting.
Each tree and shrub shall be pruned in accordance with standard horticultural practice to preserve natural character of plant. Pruning shall be done with clean, sharp tools. All pruning cuts will be made to natural targets.
Trees shall be supported immediately after planting. All trees six (6) inches and over in caliper shall be guyed, unless otherwise noted. Smaller trees shall be staked and supported as indicated.
All planting beds shall receive 4" of shredded hardwood bark mulch treated with a pre-emergent herbicide. Mulch shall not be piled directly against the tree's root collar.
Topsoll mixture for backfilling planted areas shall consist of two-parts by volume loamy topsoll thoroughly mixed with one-part peat moss. Fertilizer will not be used for one year after planting.
The following "Fall Hazard Planting", tree species (bare root or B&B) will be planted during the Spring planting season only.
Acer rubrum
Betula var.
Carpinus vars.
Celtis vars.
Cercidiphyllum vars.
Crataegus vars.
Fagus vars.
Halesia vars.
Ilex opaca vars.
Ilex vars. (all treeform evergreen vars.)
Koelreuteria vars.
Liquidambar vars.
Liriodendron tulipifera Malus in leaf Nyssa Sylvatica Ostrya Platanus × acerifolia Populus vars. Prunus all stone fruit vars. Pyrus vars. Quercus (all oaks except Q. palustris) Salix weeping vars. Tilia tomentosa vars. Zelkova vars.
No topsoll shall be removed from the site or used as spoils. Topsoll shall be redistributed on all regarded surfaces with a minimum of four (4) inch thickness and stabilized by seeding or planting.
All tree stumps and other tree parts or debris shall be removed from the site and disposed of in accordance with the law. No trees stumps, portions of tree trunks or limbs shall be buried anywhere on site. All dead or dying trees, standing or fallen, shall be removed from the site.
The developer shall selectively thin or remove all dead and dying vegetation, elther standing or fallen, and shall remove, including grubbing out stumps, all undesirable trees and other growth.
An identification tag attached at the nursery indicating the exact species and variety will be required on at least one tree of each unique variety planted.
HANDHOLE ORIENTATION IMPORTANT INSTALLATION NOTES
NOTESHANDHOLE ORIENTATIONIMPORTANCE IN THIS POSITION
1. When ordering tenon mounting and drill mounting for the same pole, follow this example: DM28/720. The combination includes a required extra handhole. 2. 3-1/2" and 4" tenons available on 5" and 6" shafts only. 3. The drilling template to be used for a particular luminaire depends on the luminaire that is used. Refer to the Technical Data Section of the Outdoor Blinder for Drilling Templates. 4. Insert "1" or "2" to designate fixture size; e.g. DM19AST2.5. Specify location and orientation when ordering option. For 1st "x": Specify the height in feet above base of pole. Example: 5ft = 5 and 20ft = 20. For 2nd "x": Specify orientation from handhole (A,B,C,D) Refer to the Handhole Orientation diagram on this page. 6. Horizontal arm is 18" x 2-3/8" 0.0. Tenon standard. Combination often-top and drill mount includes extra handhole. 7. Must add original order number. 8. Use when mill certifications are required. 9. Finish must be specified. Additional colors available; see www.lithonia.com/archcolors or Architectural Colors brochure (Form No. 794.3).C ⊗ ⊗ B A A Handhole
OUTDOOR
POLE MOUNTED LIGHT DETAILS NTS
01/15/24 REVISED PER OL&A, RVE AND CME COMMENTS MVM MVM BPM
DATE REVISION DRAWN CHECKED RELEASED
LANDSCAPE AND LIGHTING DETAILS
_LIGHTING STANDARD DETAI
NTS
GENERAL NOTES
ALL DISTURBED AREAS (OPEN SPACE, LAWN AREAS AROUND BUILDINGS ETC.) SHALL BE SEEDED OR SODDED. ANY AREA TO BE SEEDED SHALL FOLLOW SE$SC PLAN. STORM WATER MANAGEMENT BASINS TO FOLLOW STANDARDS FOR SE$SC IN NJ FOR APPROPRIATE SEED MIX PER SE$SC PLAN.
LANDSCAPE CONTRACTOR SHALL VERIFY ALL UTILITIES (PROPOSED AND EXISTING) PRIOR TO INSTALLATION. IF DISCREPANCIES OCCUR, THE THE LANDSCAPE ARCHITECT'S OFFICE SHALL BE NOTIFIED IMMEDIATELY.
SUBSTITUTION AND FINAL LOCATION OF ALL PLANT MATERIAL IS SUBJECT TO THE LANDSCAPE ARCHITECT AND TOWNSHIP'S APPROVAL.
IF DISCREPANCIES OCCUR IN THE PLANT SCHEDULE QUANTITIES, THE PLAN SHALL SUPERSEDE.
SEE THIS SHEET FOR PLANTING NOTES AND DETAILS.
THIS PLAN TO BE USED FOR LANDSCAPE AND LIGHTING PURPOSES ONLY.
PRELIMINARY AND FINAL MAJOR SITE PLAN LOTS 24 & 25 ~ BLOCK 4801
TAX MAP SHEET NO. 48 SITUATED IN JACKSON TOWNSHIP, OCEAN COUNTY, N.J.
CIVIL ENGINEERS LAND SURVEYORS PLANNERS LANDSCAPE ARCHITECTS RESERVE SPECIALISTS ARCHITECTS FWHASSOCIATES.COM 1856 Rt. 9, Toms River, NJ 08755 T: 732.797.3100 F: 732.797.3223
Licensed Landscape Architect N.J. Lic. No. AS00149
Professional Planner N.J. Lic. No. 4006
DRAWN BY MVMDATE 11/11/22
DESIGNED BY MVMSCALE 1"=30'
CHECKED BY MVMDRAWER NO. PC-894
RELEASED BY LGWPROJECT NO. 5114.0017
SHEET NO. OF