PLANTING NOTES:

NOT TO SCALE

NOT TO SCALE

LIGHT POLE AND FOUNDATION DETAIL

NOT TO SCALE

D-Series Size 1 LED Wall Luminaire

Specificationஸ் Luminaire		Back Box (BBW. E20WC)
Width:	13-3/4" (34.9 cm)	Weight:	12 lbs (5.4 kg)
Depth:	10" (25.4 cm)
Height:	6-3/8" (16.2 cm)		Height:
		D	[F5]

for 3/4 NPT side-entr conduit (BBW only)

Ordering Information EXAMPLE: DSX0 LED P6 40K T3M MVOLT SPA NLTAIR2 PIRHN DDBXD

DSX0 LED

Series LEDs Color temperature Distribution

DSX0 LED Forward optics 30K 3000K T1S Type I short (Automotive) T5S Type V short3

P1 P5 40K 4000K T2S Type II short T5M Type V medium3

P2 P6 50K 5000K T2M Type II medium T5W Type V wide3

P3 P71 T3S Type III short BLC Backlight control4

P41 T3M Type III medium LCCO Left corner cutoff4

Rotated optics T4M Type IV medium RCCO Right corner cutoff4

P102 P122 TFTM Forward throw medium

P112 P1312 T5VS Type V very short3

Ordering Information

EXAMPLE: DSXW1 LED 20C 1000 40K T3M MVOLT DDBTXD

DSXW1 LED

ther Options

SPD Separate surge protection12

EGS External glare shield

Accessories

NOTES

Ordered and shipped separately DSXWHS U House-side shield (one per light engine) DSXWBSW U Bird-deterrent spikes DSXW1VG U Vandal guard accessory 1 20C 1000 is not available with PIR, PIRH, PIR1FC3V or PIRH1FC3V. 2 MVOLT driver operates on any line voltage from 120-277V (50/60 Hz). 3 Single fuse (SF) requires 120, 277 or 347 voltage option. Double fuse (DF) requires 208, 240 or 480 voltage option. 4 Only available with 20C, 700mA or 1000mA. Not available with PIR or PIRH. 5 Back box ships installed on fixture. Cannot be field installed. Cannot be ordered as an accessory. 6 Photocontrol (PE) requires 120, 208, 240, 277 or 347 voltage option. Not available with motion/ambient light sensors (PIR or PIRH). 7 Reference Motion Sensor table on page 3. 8 Same as old ELCW. Cold weather (-20C) rated. Not compatible with conduit entry applications. Not available with BBW mounting option. Not available with fusing. Not available with 347 or 480 voltage options. Emergency components located in back box housing. Emergency mode IES files located on product page at www.lithonia.com 9 Not available with SPD. 10 Not available with E20WC. 11 Also available as a separate accessory; see Accessories information. 12 Not available with E20WC.

EATURES & SPECIFICATIONS

INTENDED USE

nLIGHT AIR CONTROLS

The DSX0 LED area luminaire is also available with nLight® AIR for the ultimate in wireless control. This powerful control platform provides out-of-the-box basic motion sensing and photocontrol functionality and is suitable for mounting heights up to 40 feet. Once commissioned using a smartphone and the easy-to-use CLAIRITY app, nLight AIR equipped luminaries can be grouped, resulting in motion sensor and photocell group response without the need for additional equipment. Scheduled dimming with motion sensor over-ride can be achieved when used with the nLight Eclapse. Additional information about nLight Air can be found here.

The sleek design of the D-Series Size 0 reflects the embedded high performance LED technology. It is ideal for many commercial and municipal applications, such as parking lots, plazas, campuses, and pedestrian areas.

CONSTRUCTION

Single-piece die-cast aluminum housing has integral heat sink fins to optimize thermal management through conductive and convective cooling. Modular design allows for ease of maintenance and future light engine upgrades. The LED driver is mounted in direct contact with the casting to promote low operating temperature and long life. Housing is completely sealed against moisture and environmental contaminants (IP65). Low EPA (0.95 ft2) for optimized pole wind loading.

FEATURES & SPECIFICATIONS

INSTALLATION

Included universal mounting bracket attaches securely to any 4" round or square outlet box for quick and easy installation. Luminaire has a slotted gasket wireway and attaches to the mounting bracket via corrosion-resistant screws.

INSTALLATION

INTENDED USE The energy savings

The energy savings, long life and easy-to-install design of the D-Series Wall Size 1 make it the smart choice for building-mounted doorway and pathway illumination for nearly any facility.

Stainless steel bolts fasten the mounting block securely to poles and walls, enabling the D-Series Size 0 to withstand up to a 3.0 G vibration load rating per ANSI C136.31. The D-Series Size 0 utilizes the AERIST™ series pole drilling pattern (template #8). Optional terminal block and NEMA photocontrol receptacle are also available.

FINISH

Exterior parts are protected by a zinc-infused Super Durable TGIC thermoset powder coat finish that provides superior resistance to corrosion and weathering. A tightly controlled multi-stage process ensures a minimum 3 mils thickness for a finish that can withstand extreme climate changes without cracking or peeling. Available in both textured and non-textured finishes.

LISTINGS

CONSTRUCTION

Two-piece die-cast aluminum housing has integral heat sink fins to optimize thermal management through conductive and convective cooling. Modular design allows for ease of maintenance. The LED driver is mounted to the door to thermally isolate it from the light engines for low operating temperature and long life. Housing is completely sealed against moisture and environmental contaminants (IP65).

CSA certified to U.S. and Canadian standards. Rated for -40°C minimum ambient. DesignLights Consortium\circledR (DLC) qualified product. Not all versions of this product may be DLC qualified. Please check the DLC Qualified Products List at www.designlights.org/QPL to confirm which versions are qualified.

OPTICS

LISTINGS

BUY AMERICAN

Precision-molded proprietary acrylic lenses are engineered for superior area lighting distribution, uniformity, and pole spacing. Light engines are available in 3000 K, 4000 K or 5000 K (70 CRI) configurations. The D-Series Size 0 has zero uplight and qualifies as a Nighttime Friendly™ product, meaning it is consistent with the LEED® and Green Globes™ criteria for eliminating wasteful uplight.

UL Listed for wet locations. Light engines are IP66 rated; luminaire is IP65 rated. Rated for -40°C to 50°C ambient with HA option. U.S. Patent No. D672,492 S. International patent pending. This product is assembled in the USA and meets the Buy America(n) government procurement requirements under FAR, DFARS and DOT. Please refer to www.acuitybrand.com/resources/buy-american for additional information.

Exterior parts are protected by a zinc-infused Super Durable TGIC thermoset powder coat finish that provides superior resistance to corrosion and weathering. A tightly controlled multi-stage process ensures a minimum 3 mils thickness for a finish that can withstand extreme climate changes without cracking or peeling. Available in textured and non-textured finishes.

DesignLights Consortium® (DLC) Premium qualified product and DLC qualified product. Not all versions of this product may be DLC Premium qualified or DLC qualified. Please check the DLC Qualified Products List at www.designlights.org/OPL to confirm which versions are qualified.

Five-year limited warranty. Complete warranty terms located at: www.acuitybrands.com/support/warranty/terms-and-conditions

rt/warranty/terms-and-condition differ as a result of end user or

Precision-molded proprietary acrylic lenses provide multiple photometric distributions tailored specifically to building mounted applications. Light engines are available in 3000 K (70 min. CRI), 4000 K (70 min. CRI) or 5000 K (70 min. CRI) configurations.

Note: Actual performance may differ as a result of end-user environment and application. All values are designed or typical values, measured under laboratory conditions at 25circC. Specifications subject to change without notice.

ELECTRICAL

Light engine(s) configurations consist of high-efficacy LEDs mounted to metal-core circuit boards to maximize heat dissipation and promote long life (up to L85/100,000 hours at 25circC). Class 1 electronic drivers are designed to have a power factor >90%, THD <20%, and an expected life of 100,000 hours with <1% failure rate. Easily serviceable 10kV surge protection device meets a minimum Category C Low operation (per ANSI/IEEE C62.41.2).

ELECTRICAL

International Dark-Sky Association (IDA) Fixture Seal of Approval (FSA) is available for all products on this page utilizing 3000K color temperature only.

Light engine(s) consist of 10 high-efficacy LEDs mounted to a metal-core circuit board to maximize heat dissipation and promote long life (L88/100,000 hrs at 25circC). Class 1 electronic drivers have a power factor >90%, THD <20%, and a minimum 2.5KV surge rating. When ordering the SPD option, a separate surge protection device is installed within the luminaire which meets a minimum Category C Low (per ANSI/IEEE C62.41.2).

BUY AMERICAN

Product with the BAA option is assembled in the USA and meets the Buy America(n) government procurement requirements under FAR, DFARS and DOT. Please refer to www.acuitybrands.com/buy-american for additional information.

STANDARD CONTROLS

The DSX0 LED area luminaire has a number of control options. DSX Size 0, comes standard with 0-10V dimming driver. Dusk to dawn controls can be utilized via optional NEMA twist-lock photocell receptacles. Integrated motion sensors with on-board photocells feature field-adjustable programming and are suitable for mounting heights up to 30 feet.

WARRANTY

5-year limited warranty. Complete warranty terms located at: www.acuitybrands.com/support/customer-support/terms-and-conditions

Note: Actual performance may differ as a result of end-user environment and

Application. All values are designed or typical values, measured under laboratory conditions at 25 °C. Specifications subject to change without notice.

LANDSCAPE & LIGHTING DETAILS

PROPOSED HOUSE OF WORSHIP

922 HYSON ROAD

BLUCK 1204 LUI 34

TOWNSHIP OF JACKSON, OCEAN COUNTY, NEW JERSEY OWNER/APPLICANT: 922 HYSON LLC

OWNER/APPLICANT: 922 HYSON LLC

HALER CONSULTING

PROFESSIONAL ENGINEERING SERVICES 40 HERMAN ROAD, UNIT 1 | PROJECT NO.

JACKSON, NEW JERSEY 08527

H.(732) 351-2583 F.(732) 806-743

COA 24GA28321300

ERIC HALPERT, PROFESSIONAL ENGINEER AND PLANNER NJ PE LIC. NO. 55771 NJ PP LIC. NO. 6488 03-29-2024

SHEET NO.

C602