Complete sections 1 through 5. Submit the appropriate fees and information required as specified in Health and Safety Code, division 13, parts 2.1 or 2.3 and California Code of Regulations, title 25, chapter 2 or 2.2 to the LOCAL ENFORCEMENT AGENCY for your park.
Enter the park identification number issued by the California Department of Housing and Community Development. If this is an original application or you have not been assigned a park identification number, leave this blank.
Original—Check this box if this is the original request (newly constructed park) for a Permit to Operate. Amended—Check this box if this is a request for an amended Permit to Operate.
Type of Amendment—Indicate the type of change being reported. If transferring ownership of the park, a recorded property deed with the new owner's name is required to be submitted with the application per California Code of Regulations (CCR), title 25, sections 1006.5 and 2006.5. When there is a change in the number of lots, enter the total number of lots in the space provided in Section 2. The addition of lots to an existing park requires local approvals in accordance with CCR, title 25, sections 1032 and 2032.
Type of Park—Check the appropriate box to indicate the type of park for which the Permit to Operate is being requested. For combination parks, more than one box may be checked.
Special Occupancy Park Designation—If applicable, check the appropriate box to indicate the type of special occupancy park. See CCR, title 25, section 2118 for special occupancy park designation information.
Number of Lots—Provide the total number of lots within the park for each category listed. If a category does not apply, leave it blank. Enter the total number of lots in the space provided. This is the number of lots that will be shown on the Permit to Operate. Do NOT add lots or change existing categories without submitting approvals from the local jurisdiction in accordance with CCR, title 25, sections 1032 and 2032.
Conditional Uses—Check the appropriate box to indicate any conditional uses. For lots constructed with electrical systems designed exclusively for units of 50, or 30 amperes (California Code of Regulations, title 25, section 1142). These lot numbers will appear on the Permit to Operate. Enter any other conditions on the use of the park as defined in Health and Safety Code sections 18205, 18300.1, 18862.13 and 18865.1.
Enter the name of the park as it should appear on the Permit to Operate. Enter the park telephone number and location of the park. This is the physical address, do NOT enter a P.O. Box or route number.
Check the appropriate box to indicate if the park is located in an incorporated city or unincorporated area.
Enter the name, mailing address, email address, and telephone number of the park owner, park operator if different than owner, and on-site property manager if different than operator. Enter the manager's hire date.
The signature of the park owner is required, along with the owner's printed name. Enter the date and location the document is signed.