1. The Stormwater Management Report and plans must be revised to comply with the NJDEP MTD Certification within Appendix C of the Stormwater Operations and Maintenance Manual within the Stormwater Management Report. The NJDEP letter states, "The NJDEP certifies the use of the Filteria Bioretention System by Contech Engineered Solutions, LLC at a Tss removal rate of 80% when designed, operated and maintained in accordance with the information provided in the verification Appendix". The proposed Stormwater Management Report plans/design is not in accordance with the States certification and therefore must be revised.
  2. On-street parking restrictions for Farmingdale Road and Pfister Road should be indicated.

II. Final Plat Drawings

  1. The map should be updated to show the found or any new file map monuments to be set.
  2. The map should be updated to be in accordance with the following Township Requirements:
  3. The minor subdivision shall be based upon a current boundary survey certified to by the subdivider and prepared or recertified not less than 12 months prior to the date of application. The outbound survey and subdivision shall be in New Jersey State Plan Coordinates, North American Datum, 1983. To assure the compatibility of the survey data and the Geographic Information System (GIS) in the course of development in the Township, the basis of bearings for all surveys must be stated in the New Jersey Plan Coordinate System, as adopted by state statutes and standards. The minor subdivision plat must contain in factual statement indicating the control monuments and methodologies used to establish the bearing system. Bearings shall be stated in degrees, minutes and seconds (as a whole integer). Survey distances defining the property and plan coordinate values of the description point of beginning and one other property corner shall be stated. Property surveys must close mathematically in all cases. Coordinated positions, bearings and distances, including the methodology for their establishment, must meet or exceed the published standards for Third Order, Class I accuracy.
  4. The title block should be updated to include the address for Lot 34, Block 1101.
  5. The curves shown on the map should be revised to include the chord bearings and distances for the curves shown on the map.
  6. The map should be updated to make the property outbound linework darker for clarity sake.
  7. The map should be revised to include the coordinate values of a minimum of three outbound corners.
  8. The proposed lot numbers will need to be approved prior to the filing of the map.
  9. The map should be updated to include the bearings and distance for all easements shown on the map.
  10. The map should be revised to include two new sight triangle easements at the intersection of Farmingdale Road and Pfister Road.