Cubic yardage of cut, fill, over-excavation and backfill, export and import.

m.. Legend and symbols.

Detail of typical lot drainage.

Reference to any Geotechnical Engineering Report and/or Engineering Geologist Report.

The sheets following shall clearly delineate the grading of the project and shall include the following:

Precise location of all existing buildings, structures, trees, cesspools, septic tanks, and wells on the property.

The location of any building or structure or other significant feature within 15' of the project.

All existing and proposed easements for drainage devices, roadways and utilities easement should be official record book and page.

Accurate contours or spot elevations indicating the topography of the existing ground. Contours or spot elevations must be shown beyond the property line of the site being graded to properly indicate existing drainage patterns.

Finish grades by contours and/or spot elevations indicating proposed drainage patterns and grading. Show finish grade elevations at corners of all structures, BCR, ECR, B.C., E.C., BVC, EVC and grade breaks. For precise grading plans show pad and finished floor elevations.

Daylight lines of all cuts and fills. Make them continuous and obvious.