OT TO SCALE

DSX0 LED

Shipped installed NLTAIR2 PIRHN PER PERS PER7 DMG PIR PIR3C3V PIR1FC3V High/low, motion/ambient sensor, 8-15' mounting height, ambient sensor enabled at 5fc19,20\nHigh/low, motion/ambient sensor, 15-30' mounting height, ambient sensor enabled at 5fc19,20\nHigh/low, motion/ambient sensor, 8-15' mounting height, ambient sensor enabled at 1fc19,20 Shipped installed HS SF DF L90 R90 DDL HA BAA House-side shield22\nSingle fuse (120, 277, 347V)6\nDouble fuse (208, 240, 480V)6\nLeft rotated optics2\nRight rotated optics2\nDiffused drop lens22\n50°C ambient operations1\nBuy America(n) Act Compliant DDBXD DBLXD DNAXD DWHXD DDBTXD DDBBXD DNATXD aluminum DWHGXD Textured white

NLIGHT AIR generation 2 enabled13,14\nNetwork, high/low motion/ambient sensor15\nNEMA twist-lock receptacle only (control ordered separate)16\nFive-pin receptacle only (control ordered separate)16,17\nSeven-pin receptacle only (leads exit fixture) (control ordered separate)16,17\n0-10V dimming extend out back of housing for external control (control ordered separate)18 PIR PIR3C3V PIR1FC3V FAO Field adjustable output21 Shipped installed HS SF DF L90 R90 DDL HA BAA House-side shield22\nSingle fuse (120, 277, 347V)6\nDouble fuse (208, 240, 480V)6\nLeft rotated optics2\nRight rotated optics2\nDiffused drop lens22\n50°C ambient operations1\nBuy America(n) Act Compliant DDBXD DBLXD DNAXD DWHXD DDBTXD DDBBXD DNLATXD aluminum DWHGXD Textured white

The sleek design of the D-Series Size 0 reflects the embedded high performance LED technology. It is ideal for many commercial and municipal applications, such as parking lots, plazas, campuses, and pedestrian areas.

Single-piece die-cast aluminum housing has integral heat sink fins to optimize thermal management through conductive and convective cooling. Modular design allows for ease of maintenance and future light engine upgrades. The LED driver is mounted in direct contact with the casting to promote low operating temperature and long life. Housing is completely sealed against moisture and environmental contaminants (IP65). Low EPA (0.95 ft2) for optimized pole wind loading.

Exterior parts are protected by a zinc-infused Super Durable TGIC thermoset powder coat finish that provides superior resistance to corrosion and weathering. A tightly controlled multi-stage process ensures a minimum 3 mils thickness for a finish that can withstand extreme climate changes without cracking or peeling. Available in both textured and non-textured finishes.

Precision-molded proprietary acrylic lenses are engineered for superior area lighting distribution, uniformity, and pole spacing. Light engines are available in 3000 K, 4000 K or 5000 K (70 CRI) configurations. The D-Series Size 0 has zero uplight and qualifies as a Nighttime Friendly™ product, meaning it is consistent with the LEED® and Green Globes™ criteria for eliminating wasteful uplight.

Light engine(s) configurations consist of high-efficacy LEDs mounted to meti core circuit boards to maximize heat dissipation and promote long life (up to L85/100,000 hours at 25circC). Class 1 electronic drivers are designed to have a power factor >90%, THD <20%, and an expected life of 100,000 hours with < failure rate. Easily serviceable 10kV surge protection device meets a minimum Category C Low operation (per ANSI/IEEE C62.41.2).

The DSX0 LED area luminaire has a number of control options. DSX Size 0, comes standard with 0-10V dimming driver. Dusk to dawn controls can be utilized via optional NEMA twist-lock photocell receptacles. Integrated motion sensors with on-board photocells feature field-adjustable programming and are suitable for mounting heights up to 30 feet.

The DSX0 LED area luminaire is also available with nLight® AIR for the ultimate in wireless control. This powerful controls platform provides out-of-the-box basic motion sensing and photocontrol functionality and is suitable for mounting heights up to 40 feet. Once commissioned using a smartphone and the easy-to-use CLAIRITY app, nLight AIR equipped luminaries can be grouped, resulting in motion sensor and photocell group response without the need for additional equipment. Scheduled dimming with motion sensor over-ride can be achieved when used with the nLight Eclapse. Additional information about nLight Air can be found here.

Included mounting block and integral arm facilitate quick and easy installation. Stainless steel bolts fasten the mounting block securely to poles and walls, enabling the D-Series Size 0 to withstand up to a 3.0 G vibration load rating per ANSI C136.31. The D-Series Size 0 utilizes the AERIS™ series pole drilling pattern (template #8). Optional terminal block and NEMA photocontrol receptacle are also available.

UL listed to meet U.S. and Canadian standards. UL Listed for wet locations. Light engines are IP66 rated; luminaire is IP65 rated. Rated for -40circC to 50circC ambient with HA option. U.S. Patent No. D672,492 S. International patent pending. DesignLights Consortium® (DLC) Premium qualified product and DLC qualified product. Not all versions of this product may be DLC Premium qualified or DLC qualified. Please check the DLC Qualified Products List at www.designlights.org/QPL to confirm which versions are qualified.

International Dark-Sky Association (IDA) Fixture Seal of Approval (FSA) is available for all products on this page utilizing 3000K color temperature only.

Product with the BAA option is assembled in the USA and meets the Buy America(n) government procurement requirements under FAR, DFARS and DOT. Please refer to www.acuitybrands.com/buy-american for additional information.

5-year limited warranty. Complete warranty terms located at: www.acuitybrands.com/support/customer-support/terms-and-conditions

Note: Actual performance may differ as a result of end-user environment and application. All values are designed or typical values, measured under laboratory conditions at 25 °C. Specifications subject to change without notice.

DSXW1 LED

Series LEDs Drive Current Color temperature Distribution Voltage Mounting Control Options

DSXW1 LED 10C (one engine) 350 530 mA 30K 40K 3000 K T25 Type II Short MVOL2 Shipped included Shipped installed

530 700 mA 40K 4000 K T2M Type II Medium 1203 (blank) Surface mounting PE Photoelectric cell, button type6

20C (two engines)1 700 1000 mA (1 A)1 50K 5000 K T3S Type III Short 2083 BBW Surface-mounted back box (for conduit entry)5 DMG 0-10V dimming wires pulled outside fixture (for use with an external control, ordered separately)

AMBPC Amber phosphor converted T3M Type III Medium 2403 PIR 180^circ motion/ambient light sensor, <15° mtg ht1/2

T4M Type IV Medium 2773 PIRH 180^circ motion/ambient light sensor, 15-30° mtg ht1/2

TFTM Forward Throw Medium 3473,4 PIR1FC3V Motion/ambient sensor, 8-15° mounting height, ambient sensor enabled at 1fc1/2

TFTM Forward Throw 4803,4 PIRH1FC3V Motion/ambient sensor, 15-30° mounting height, ambient sensor enabled at 1fc1/2

TFTM Forward Throw 4803,4 E20WC Emergency battery backup (includes external component enclosure), CA Title 20 compliant5,9

Other Options Finish (required)

Shipped installed Shipped separately11 DDBXD Dark bronze DSSXD Sandstone DWHGXD Textured white

SF Single fuse (120, 277 or 347V)3,10 BSW Bird-deterrent spikes DBLXD Black DDBTXD Textured dark bronze DSSTXD Textured sandstone

DF Double fuse (208, 240 or 480V)3,10 VG Vandal guard DNAXD Natural aluminum DBLBXD Textured black

HS House-side shield11 DDL Diffused drop lens DWHXD White DNATXD Textured natural aluminum

SPD Separate surge protection12

Accessories NOTES

Ordered and shipped separately. 1 20C 1000 is not available with PIR, PIRH, PIKIFLCV or FINIFLCV.

2 MVOLT driver operates on any line voltage from 120-277V (50/60 Hz).

3 Single fuse (SF) requires 120, 277 or 347 voltage option. Double fuse (DF) requires 208, 240 only available with 20C, 700mA or 1000mA. Not available with PIR or PIPL.

5 Back box ships installed on fixture. Cannot be field installer.

6 Photocontrol (PE) requires 120, 208, 240^circ

7 Reference Motion Sensor table on page 3.

8 Same as old ELCW. Cold weather (-20C) rated. Not compatible with conduit.

available with 347 or 480 voltage options. Emergency components located in back box housing.

9 Not available with SPD.

10 Not available with E20WC.

11 Also available as a separate accessory; see Accessories information.

The energy savings, long life and easy-to-install design of the D-Series Wall Size 1 make it the smart choice for building-mounted doorway and pathway illumination for nearly any facility.

Two-piece die-cast aluminum housing has integral heat sink fins to optimize thermal management through conductive and convective cooling. Modular design allows for ease of maintenance. The LED driver is mounted to the door to thermally isolate it from the light engines for low operating temperature and long life. Housing is completely sealed against moisture and environmental contaminants (IP65).

Exterior parts are protected by a zinc-infused Super Durable TGIC thermoset powder coat finish that provides superior resistance to corrosion and weathering. A tightly controlled multi-stage process ensures a minimum 3 mils thickness for a finish that can withstand extreme climate changes without cracking or peeling. Available in textured and non-textured finishes.

Precision-molded proprietary acrylic lenses provide multiple photometric distributions tailored specifically to building mounted applications. Light engines are available in 3000 K (70 min. CRI), 4000 K (70 min. CRI) or 5000 K (70 min. CRI) configurations.

Light engine(s) consist of 10 high-efficacy LEDs mounted to a metal-core circuit board to maximize heat dissipation and promote long life (L88/100,000 hrs at 25circC). Class 1 electronic drivers have a power factor >90%, THD <20%, and a minimum 2.5KV surge rating. When ordering the SPD option, a separate surge protection device is installed within the luminaire which meets a minimum Category C Low (per ANSI/IEEE C62.41.2).

Included universal mounting bracket attaches securely to any 4" round or square outlet box for quick and easy installation. Luminaire has a slotted gasket wireway and attaches to the mounting bracket via corrosion-resistant screws.

CSA certified to U.S. and Canadian standards. Rated for -40°C minimum ambient. DesignLights Consortium® (DLC) qualified product. Not all versions of this product may be DLC qualified. Please check the DLC Qualified Products List at www.designlights.org/QPL to confirm which versions are qualified.

This product is assembled in the USA and meets the Buy America(n) government procurement requirements under FAR, DFARS and DOT. Please refer to www.acuitybrands.com/resources/buy-american for additional information.

itybrands.com/support/warranty/terms-and-conditions

Note: Actual performance may differ as a result of end-user environment and application. All values are design or typical values, measured under laboratory conditions at 25circC. Specifications subject to change without notice.

REV. - 03-26-2026 REVISED FOR REVIEW COMMENTS

REV. - 03-30-2025 REVISED FOR RESOLUTION COMPLIANCE

REV. - 02-26-2025 REVISED FOR RESOLUTION COMPLIANCE

REV. - 11-08-2024 REVISED FOR OCEAN COUNTY COMMENTS

REV. - 10-18-2024 REVISED FOR SCD COMMENTS

REV. - 8-06-2024 REVISED FOR SCD COMMENTS

LANDSCAPE & LIGHTING DETAILS

PRELIMINARY & FINAL MAJOR SITE PLAN 1231 ALDRICH ROAD BLOCK 6002 LOTS 2 & 3 TOWNSHIP OF JACKSON OCEAN COUNTY, NEW JERSEY OWNER/APPLICANT: CHAIM HEIMOVITZ & MATTISYAHU NUSSBAUM / KEHILLA DBROOKWOOD IV

SHEET NO.

7 of 19