Re: Escrow #: Z32505 Completeness Review #1 Morgan Municipal Project No. JKZB-Z32505 Applicant: James Hughes Application: Amended Site Plan and Use Variance Approval Block(s)/Lot(s): 22112/2 Site Address: 280 Faraday Avenue Zone: "I" (Industrial) Jackson Township, Ocean County, NJ 08527

  1. Jackson Township Land Use Disclosure Statement, signed by Applicant & Applicant's Engineer, undated;
  2. Proof of Taxes Paid through 08/01/2023;
  3. 200 FT Property and Utility Owners List, certified by Township Tax Assessor, dated 09/28/2023;
  4. Amended Site Plan and Use Variance Application Review Letter, prepared by Board Planner, Remington & Vernick Engineers, signed by Ernest J. Peters, Jr., P.P., P.E., C.M.E., dated 01/30/2024;
  5. Stormwater Report entitled, “Stormwater Management Report, Prepared for 280 Faraday Ave, Jackson, NJ 08527 (Block 22112, Lot 2)”, consisting of (128) sheets, unsigned, dated April 2024, last revised November 2024;
  6. Site Plan entitled, “Township of Jackson, Ocean County, New Jersey, 280 Faraday Avenue, Block 22112, Lot 2, Proposed: Use Variance”, consisting of (5) sheets, prepared by 3-D Engineering & Construction, signed by Lino DeAlmeida III, P.E., last revised 01/07/2025.

Based upon our review, we recommend that this application be deemed TECHINCALLY COMPLETE subject to the applicant paying all applicable fees and complying with all applicable notification requirements as set forth in the Municipal Ordinance and the Municipal Land Use Law. Applicant to contact Zoning Board Secretary, Dawn D'Agostino planningzoning@jacksontwpnj.net, to be placed on the next available hearing date.

We note a Technical Review Letter prepared by our office will be provided under separate cover at a later date.

Very truly yours,

Morgan Municipal, LLC

MARK ROHMEYER, P.E., P.P., C.M.E.

ZONING BOARD ENGINEER TOWNSHIP OF JACKSON

MR:CJA

cc: Jeffrey Purpuro, Zoning Officer (jpurpuro@jacksontwpnj.net) James Hughes, Applicant (jimhughesplbg@aol.com) Lino DeAlmeida III, P.E., Applicant's Engineer (Idealmeida@3dengineering.com)