TERRACON CONSULTANTS, INC. 2020 FEE SCHEDULE -SARASOTA MATERIALS TESTING
UNIT RATE
DESCRIPTION OF WORK
TECHNICAL AND PROFESSIONAL STAFF
Chief Engineer/Chief Scientist/Chief Geologist Per Hour $
Principal Engineer/Principal Scientist/Principal Geologist Per Hour $
Senior Engineer/Senior Project Manager/Senior Geologist/Senior Scientist Per Hour $
Project Manager/Project Engineer/Project Geologist/Project Scientist Per Hour $
Assistant Project Manager/Staff Engineer/Assistant Project Geologist/Assistant Project Scientist Per Hour $
Chief Field Technician/Chief Engineering Technician/Chief Environmental Technician Per Hour $
Senior Field Technician/Senior Engineering Technician/Senior Environmental Technician Per Hour $
Field Technician/Engineering Technician/Environmental Technician Per Hour $
Soils Technician/Concrete Technician Per Hour $
CADD Operator Per Hour $
Administrative Assistant Per Hour $
NOTES
Hourly rates are portal to portal.
Hourly rates are portal to portal.
Stand-by time and cancellation without prior notice will be invoiced at the appropriate hourly rate.
An overtime multiplier of 1.5 will be applied to the above rates for any work performed between 6:00 p.m. to 7:00 a.m. weekends, holidays and over 8 hours per day.
Rates for services not listed will be provided as requested.
Field Support Vehicle Per Day $ 85.00
Lodging, per person (subject to change dependent on geographical area) Per Day $ 120.00
Per Diem, per person Per Day $ 50.00
Automobile Travel (non-rental) Per Mile $ 0.65
TRAVEL EXPENSES
MATERIALS TESTING SERVICES
I. SOILS
SOILS
II. CONCRETE
Field Services
In-Place Density Test
Sampling
Laboratory Services
Modified or Standard Proctor Test
Florida Bearing Value (FBV) Test
LBR or CBR Test (including Modified Proctor)
Full Grain Size (excluding #200 Sieve)
Wash Through #200 Sieve
Natural Moisture Content
Organic Content
Liquid and Plastic Limits
pH Test
A. Field Services
Field Services
Sampling, Slump Testing, Molding Cylinders for Compressive Strength Tests, Hourly Tech Rate
Temperature Testing, Air Content Tests, and Cylinder Pick- (up to 4 cylinders per set) Per Hour Tech Rate
Flexural Strength Beams (up to 3 per set) Hourly Tech Rate
Coring (Vertical Coring) - Equipment Mobilization Per Trip $ 250.00
Coring Fee (per person) Per Hour Tech Rate