The vehicle fueling system, including underground fuel storage tanks, fuel piping, vapor recovery systems, and dispensing equipment;

Concrete fueling and dispensing aprons, including dispensing area island layout;

The electrical system to support the fuel system;

Car wash equipment;

Vehicle service compressed air systems;

Motor and used oil systems:

Windshield washer fluid system;

Installed vacuum system; and

Vehicle lifts.

Mechanical, Electrical, Plumbing building design not related to the systems outlined above;

Architecture or building engineering;

Structural design or the design of any structural elements, except as noted above;

Design of pile supported slabs or foundations – we have assumed that the fuel system slabs will not be pile supported;

Seismic anchoring or bracing;

Civil engineered drawings (electronic AutoCAD base plans) – we assume plans for system layout will be provided by others. Additionally, we assume Stantec will be provided with final layout drawings that will not require further refinement;

Geotechnical engineering or foundation design;

Containment areas, dikes, or storm water treatment systems;

Emergency generators or infrastructure:

Any tanks not part of the systems outlined in the above scope;

Pre-manufactured canopy coordination;

Fire suppression, fire alarm, or life safety systems;

BIM Coordination with the selected contractor. While we have assumed the design will be in BIM/Revit, and have included BIM coordination with the design team, we have assumed that our work in BIM will conclude at the time of bidding;

Dispensing area or fuel delivery area drainage systems or any other oil-water separator systems; and

Existing utility relocations.