Typical edge of slab details for cladding attachment

Special construction conditions noted (if needed)

Provide wind, seismic, dead and live loads design information

Provide accommodation for seasonal systems design - information as necessary to define construction

Footing, beam, column and connection details

Building elevations for architectural precast construction

Size and locate utility risers, shafts, chases and equipment coordinated with architectural plans

Heating and cooling load criteria for each space and major duct or pipe runs sized to interface with structural and architectural building components

Mechanical room equipment layouts

Locate major equipment such as air handling units, heat pumps, exhaust fans, unit heaters, etc.

Locate intake and exhaust louvers

Locate and indicate air curtains and/or seasonal systems

Indicate typical layouts of all ceiling devices

Consider access and replacement requirements with all equipment room layouts

Coordinate ceiling plenum space with architectural, plumbing, fire protection, electrical and structural

Air and water flow diagrams showing CFM and GPM respectively

Show electrical requirements such as panel size, location, voltage and current requirements or mechanical equipment

Critical mechanical room cross sections

Corridor sections including duct clearances

Grilles and diffusers

Special equipment

Controls/Building Management Control System (BMCS)

Floor plans:

Detail plans:

8

Size and location of utility risers, shafts, chases and equipment

Locate all toilets, urinals, lavatories, mop sinks, floor drains and drinking fountains