- i.Include major building sections, identify column lines, openings and relationships between floor, ceilings, roof structure and mechanical systems
- ii.Vertical dimensions including floor to roof and ceiling heights
- iii.Finished grades around the building
- iv.Typical and major wall sections or assembly details
e. Details:
- i.Large scale typical details of exterior wall assemblies, parapets to foundation
- ii.Large scale typical details of major foundation and perimeter treatment
- iii.Typical window and door details (i.e.: head, jamb and sill conditions)
- iv.Typical interior and exterior columns details
f. Interior Elevations:
g. Schedules:
- v.Key enlarged plans (+/- 1 1/4″)
- vi.Major casework elevations and profiles
- vii.Partition types
- i.Elevations of significant interior spaces
- i.Interior finish schedule
- ii.Door and frame schedules
- iii.Door hardware schedule
- iv.Window and glazing schedule
C. CODE ANALYSIS:
a. Code footprint:
- b.Life safety plans
- i.Include all fire rated partitions
D. STRUCTURAL:
- a.Structural Plans:
- i.Fully-dimensioned foundation plan including interior and perimeter foundations, footings, wall beams and grade beams
b. Structural sections and details:
- ii.Fully-dimensioned framing plans for all floors and roofs including major member sizes noted or scheduled, typical and maximum column sizes
- iii.Locate columns, beams, purlins and joists, etc.
- i.Location of any in-floor electrical or IT systems
- ii.Major penetrations (i.e. slab openings, pits, trench drains, located on drawings
- iii.Expansion joints located
7