B. ARCHITECTURAL:

a. Floor Plans:

• ii.Internal partitions drawn, located and dimensioned
• iii.All casework and other equipment called out on plans
• iv.Major mechanical/electrical systems determined and their requirements reflected and indicated on the plans including, louvers, areaways and utility entrances
• v.Locate all plumbing fixtures in restrooms
• vi.All rooms named and numbered
• vii.Locate exterior and interior doors and windows
• viii.Locate typical and fire rated partition types
• ix.All keyed references: match lines, building sections, enlarged plans, keyed notes, etc.
• x.Finish floor elevations noted
• xi.Expansion joints indicated (if needed)
• xii.Toilet cores drawn to larger scale (+/- 1/4"), dimensioned and keyed to larger plans
• xiii.Plan and elevations of featured areas drawn to a larger scale (+/- 1/4) with all surfaces shown and called out and keyed to larger plans
• xiv.Traffic topping/coating plans indicating limits

b. Reflected Ceiling Plans:

Provide a reflected ceiling plan for all finished spaces which includes:

• i.Located lighting fixtures
• ii.Located ceiling mounted grilles/registers
• iii.Located any remaining ceiling mounted devices
• iv.Soffits/bulkheads, skylights
• v.Identify major ceiling materials
• vi.Identify all areas with exposed structure

c. Building Elevations:

• i.Building elevations including roof structures and foundations
• ii.Identify and locate all exterior windows and doors
• iii.Identify floor and roof levels, vertical dimensions and overall building heights
• iv.Column center lines
• v.Locate expansion joints and major panel joints
• vi.All materials noted with demarcation of materials shown
• vii.Detailed elevations at a larger scale (+/- 1/4”) as necessary to explain design intent (entrances, special metal panels or masonry, building canopy, etc.)
• viii.Major keyed references: match lines, building sections, wall sections
• d.Building and Wall Sections:

6

Exhibit B – Design Deliverables