and apron and the parking lot design. It is assumed the layout of the taxiway and apron will require three (3) different layout options.

• c.Specific preliminary plan sheets developed will be for the following:
• i.General and Geometric Plans
• ii.Concept Phasing Plans
• iii.Typical sections

Architectural

1. Review current General Aviation Facilities Design Standard and align program to requirements noted in room data sheets.
2. Perform code review based on current adopted Florida Family of Codes and applicable ADA standards.
3. Provide up to three floor plan options in alignment with program requirements for review and selection of preferred alternative.
4. Develop space matrix to show room sizing and alignment to the Design Standard.
5. Develop up to three exterior massing options for the building to establish exterior aesthetic.
6. Structural/Mechanical/Electrical/Plumbing/Fire Protection/Low Voltage
1. Perform relevant tasks, related to each discipline respectively, described above in "Up Front Field Work/Investigation/Coordination"
2. a.Not all items in general scope apply to all trades
2. Coordinate with Airport and CBP for layout options on all engineering systems.
3. Develop written narratives in report describing basis of design and the impacts and recommendations of each option for review by SRO, CBP, and stakeholders.

TASK 8

August 2, 2021