C&S understands the CBP is currently using the FIS inside the terminal for both GA and Commercial inspections. There is a need to have them separated and a new GA FIS Facility constructed. C&S shall provide the required services to design the approximately 5,000sf GA FIS Facility project (the "Project"). The Project will be performed and constructed by the SMAA/SRQ Airport without grant assistance.
The new GA FIS Facility Project generally involves the construction of an approximately 5,000sf GA Customs Facility in alignment with the current version of the General Aviation Facilities Design Guide. The customs facility shall include office space, administration space, commons area, toilet/restroom facilities, screening and waiting areas, and required CBP equipment. Project also includes the design of an HVAC heating and cooling system, electrical power and lighting systems with emergency backup, low voltage security and communications systems with interconnectivity to the main Terminal CBP FIS, and life safety systems as required for the new FIS Customs Facility.
In addition, project involves constructing a new taxiway and ramp, site work for a parking lot and surrounding grade tie-ins including the extension of existing utilities such as electricity, gas, water, sewer, cable, and data/telephone. See attached Exhibit No. 01.
The building addition will be designed with sustainability practices in mind, wherever practical, however costs associated with any LEED or other certification are not included.
The estimated construction cost for this facility is between $4,000,000 - $5,000,000 per SRQ personnel. C&S shall evaluate the feasibility of this project, based upon C&S's experience as a design professional, and keep SRQ apprised during each phase of the Project of the results of such evaluation. C&S shall advise SRQ as to options available for reducing construction costs to stay within the budget, if it appears likely that contractor bid prices will exceed this budget.
Services to be provided by C&S shall include civil, architectural, interior design, structural, mechanical, electrical, plumbing, fire protection, geotechnical, survey, and permitting, as applicable, required to accomplish the following Scope of Work items ("Basic Services").