The Client will provide right of entry to the site as well as any associated project information. The client agrees to indemnify, hold harmless, and defend Colliers Engineering & Design (CED) and any of CED's employees from and against all loss, injury, damage and legal liability, including attorney's fees and other costs of defense arising out of any structural damage, utility damage, or boring settlement.

The test borings will each be advanced utilizing mud-rotary drilling techniques. Representative soil samples will be obtained continuously in the top ten feet. Soil samples will be obtained from within the borehole by means of a standard two-inch outside-diameter split spoon sampler advanced in accordance with ASTM Designation D-1586 for the Standard Penetration Test.

If conditions encountered differ significantly from those anticipated, and as a result would increase the scope of our work, we will notify you immediately and provide a new scope of work for your authorization so as to continue with work.

Soil samples will be classified in the field and returned to our laboratory for further review and evaluation, as necessary. The samples will be stored for a period of 60 days from the date of our report, unless otherwise negotiated with the Client.

The results of our services will be presented in a written report at the conclusion of our exploration and evaluation program. The report will include a test location plan showing the location of the field explorations, detailed logs and our specific conclusions and recommendations. We will address, in detail, the work outlined in our Scope of Services.

This Task will be to provide additional engineering consultation beyond the scope of Task G600 of this proposal. This includes but may not be limited to providing report revisions, additional engineering input, design analyses, and brainstorming, including participation in design team meetings and teleconferences, as the design team works towards finalizing an appropriate design.

Since it is impossible to anticipate the amount of time necessary we will bill this phase of work on an hourly basis in accordance with our Fee Schedule.

For your convenience, we have broken down the total estimated cost of the project into the categories identified within the scope of services.

This Contract and Fee Schedule are based upon the acceptance of CED's Business Terms and Conditions contained in Section II of this Contract.

Page 3 | 5