Plans and elevations of feature areas (public spaces) drawn to a larger scale (+/- 1/4) with all surfaces shown and materials called out and keyed to larger plans

Demolition plans

Roof plans

Architectural reflected ceiling plans for all finished spaces

Architectural building elevations

Detailed elevations at a larger scale (+/- 1/4") as necessary to explain intent

Major keyed references: match lines, buildings sections, wall sections

Architectural building sections

Representative enlarged Construction details – plan and section

Technical specifications - Draft

Div. 00 & Div. 01 specifications – Draft

Task 3 Design Development Deliverables include:

Scheduling, Phasing, DD Cost Estimate & GMP Reviews: Work with the selected CM to refine the design and construction schedule, and further develop construction phasing plans and provide phasing analyses. Review DD cost estimate prepared by the CM. Assist SRQ and CM on GMP preparation and review for the Civil & Foundation ERP's.

QAQC review markup documents

Wayfinding butterfly plans

Construction Documents: The main objective of the Construction Document Phase will be to prepare documents which include sufficient detail required to construct the project.

Architecture, Interior Design & Wayfinding (GRESHAM SMITH):

Coordinate with design team/CM to answer/clarify questions and ensure construction documents are completed and consistent with the criteria established to bid the project. Provide additional information as required to facilitate 'the 'buy-out' of the project following bidding based on CD documents.

Finalize Design Issues

Finalize phasing plans and coordinate schedule requirements with CM and SRO

Completion of Long Form Technical specifications.

Completion of floor plans, roof plans and reflected ceiling plans.

Identification of all wall, partition types and appropriate fire ratings.

Completion of building sections and elevations.

Completion of enlarged plans such as restrooms with associated toilet accessory schedules, toilet partition arrangements and enlarged details for vanity units and other design features.

Enlarged wall sections.

Completion of large-scale construction details – plan, section and 3-dimensional where required.

Completion of door, window and louver schedules.

Millwork elevations and details.

Custom fabrications required for EVIDS supports, touchscreen displays and other similar systems.

Staircase details, guard rail details, escalator sections, elevator shaft sections.