{
    "document_id": 16836,
    "page": 240,
    "width_pt": 612,
    "height_pt": 792,
    "rotation": 0,
    "pipeline_version": "paddleocr-vl-1.6+paul-48",
    "engine": "paddleocr_vl",
    "source_run_id": 16947,
    "item_count": 43,
    "counts_by_type": {
        "footer": 1,
        "heading": 24,
        "text": 18
    },
    "build_ms": 6,
    "items": [
        {
            "id": "p240.1",
            "order": 1,
            "type": "heading",
            "bbox": {
                "l": 51.36,
                "t": 738.24,
                "r": 275.04,
                "b": 727.44
            },
            "text": "IGS 303: Studies in Latin American Cultures",
            "attrs": {
                "block_label": "paragraph_title"
            },
            "level": 3
        },
        {
            "id": "p240.2",
            "order": 2,
            "type": "text",
            "bbox": {
                "l": 51.6,
                "t": 726.24,
                "r": 282.96,
                "b": 680.16
            },
            "text": "Prerequisites: ENG 101 and IGS 200 or consent of director. A multi cultural study of the major forces that shaped various Latin American cultures in their social, artistic, historical, political, philosophical, and religious expressions."
        },
        {
            "id": "p240.3",
            "order": 3,
            "type": "heading",
            "bbox": {
                "l": 51.6,
                "t": 670.56,
                "r": 276.72,
                "b": 659.52
            },
            "text": "IGS 304: The African-American Experience 3",
            "attrs": {
                "block_label": "paragraph_title"
            },
            "level": 3
        },
        {
            "id": "p240.4",
            "order": 4,
            "type": "text",
            "bbox": {
                "l": 51.6,
                "t": 659.52,
                "r": 289.44,
                "b": 602.88
            },
            "text": "Prerequisites: ENG 101 and IGS 200 or consent of director. A study of the evolution of the African-American experience from the period of slavery to the present, especially as reflected in the writings of African-American intellectuals."
        },
        {
            "id": "p240.5",
            "order": 5,
            "type": "heading",
            "bbox": {
                "l": 51.36,
                "t": 591.84,
                "r": 168.48,
                "b": 581.04
            },
            "text": "IGS 499: Senior Seminar 3",
            "attrs": {
                "block_label": "paragraph_title"
            },
            "level": 3
        },
        {
            "id": "p240.6",
            "order": 6,
            "type": "text",
            "bbox": {
                "l": 51.84,
                "t": 580.56,
                "r": 282.48,
                "b": 534.48
            },
            "text": "Prerequisites: ENG 101 and IGS 200, or IGS 201, or IGS 300 or equivalent, or consent of director. A senior-level seminar devoted to the exploration of an interdisciplinary theme. Topics will vary according to the instructor."
        },
        {
            "id": "p240.7",
            "order": 7,
            "type": "heading",
            "bbox": {
                "l": 51.6,
                "t": 524.88,
                "r": 195.6,
                "b": 513.36
            },
            "text": "INDUSTRIAL TECHNOLOGY",
            "attrs": {
                "block_label": "paragraph_title"
            },
            "level": 3
        },
        {
            "id": "p240.8",
            "order": 8,
            "type": "heading",
            "bbox": {
                "l": 51.6,
                "t": 502.08,
                "r": 195.36,
                "b": 490.8
            },
            "text": "INT 101: Engineering Drafting I",
            "attrs": {
                "block_label": "paragraph_title"
            },
            "level": 3
        },
        {
            "id": "p240.9",
            "order": 9,
            "type": "text",
            "bbox": {
                "l": 51.6,
                "t": 489.6,
                "r": 283.68,
                "b": 455.52
            },
            "text": "Fundamentals in use and care of instruments, lettering, line construction, rules of dimensioning, orthographic projection, auxiliary view, and sectional and pictorial drawing."
        },
        {
            "id": "p240.10",
            "order": 10,
            "type": "heading",
            "bbox": {
                "l": 51.84,
                "t": 445.68,
                "r": 200.4,
                "b": 434.4
            },
            "text": "INT 102: Engineering Drafting II",
            "attrs": {
                "block_label": "paragraph_title"
            },
            "level": 3
        },
        {
            "id": "p240.11",
            "order": 11,
            "type": "heading",
            "bbox": {
                "l": 268.8,
                "t": 445.68,
                "r": 276,
                "b": 435.84
            },
            "text": "3",
            "attrs": {
                "block_label": "paragraph_title"
            },
            "level": 3
        },
        {
            "id": "p240.12",
            "order": 12,
            "type": "text",
            "bbox": {
                "l": 51.6,
                "t": 433.44,
                "r": 282.24,
                "b": 376.56
            },
            "text": "Prerequisite: INT 101 or consent of instructor. Intermediate concepts of working drawings. Includes advanced sections, auxiliaries, threads and fasteners, tolerancing, and geometric dimensioning. Specialized equipment used in duplication methods and blueprint reading."
        },
        {
            "id": "p240.13",
            "order": 13,
            "type": "heading",
            "bbox": {
                "l": 51.84,
                "t": 366.96,
                "r": 190.08,
                "b": 355.68
            },
            "text": "INT 104: Descriptive Geometry",
            "attrs": {
                "block_label": "paragraph_title"
            },
            "level": 3
        },
        {
            "id": "p240.14",
            "order": 14,
            "type": "heading",
            "bbox": {
                "l": 268.56,
                "t": 366.24,
                "r": 275.76,
                "b": 356.88
            },
            "text": "3",
            "attrs": {
                "block_label": "paragraph_title"
            },
            "level": 3
        },
        {
            "id": "p240.15",
            "order": 15,
            "type": "text",
            "bbox": {
                "l": 51.36,
                "t": 354.96,
                "r": 286.32,
                "b": 309.36
            },
            "text": "Specific problems involving points, lines, planes, curved surfaces, intersections, and development problems. Emphasis directed toward auxiliary views, points and lines, revolutions, and development of surfaces."
        },
        {
            "id": "p240.16",
            "order": 16,
            "type": "heading",
            "bbox": {
                "l": 52.08,
                "t": 299.28,
                "r": 210.48,
                "b": 287.76
            },
            "text": "INT 124: Basic Electricity (DC/AC)",
            "attrs": {
                "block_label": "paragraph_title"
            },
            "level": 3
        },
        {
            "id": "p240.17",
            "order": 17,
            "type": "text",
            "bbox": {
                "l": 51.6,
                "t": 287.04,
                "r": 286.8,
                "b": 242.16
            },
            "text": "Principles and measurement of direct current, voltage, resistance; alternating current, capacitance, inductance, impedance; and mathematical analysis of basic electricity covering Kirchhoff, Thevenin, and Norton theorems."
        },
        {
            "id": "p240.18",
            "order": 18,
            "type": "heading",
            "bbox": {
                "l": 51.84,
                "t": 231.6,
                "r": 177.6,
                "b": 220.8
            },
            "text": "INT 125: Residential Wiring",
            "attrs": {
                "block_label": "paragraph_title"
            },
            "level": 3
        },
        {
            "id": "p240.19",
            "order": 19,
            "type": "heading",
            "bbox": {
                "l": 268.8,
                "t": 231.36,
                "r": 276,
                "b": 222.24
            },
            "text": "3",
            "attrs": {
                "block_label": "paragraph_title"
            },
            "level": 3
        },
        {
            "id": "p240.20",
            "order": 20,
            "type": "text",
            "bbox": {
                "l": 51.36,
                "t": 219.84,
                "r": 285.36,
                "b": 186
            },
            "text": "A study of the National Electrical Code relative to residential wiring local codes. Experience is gained through wiring circuits found in the modern house."
        },
        {
            "id": "p240.21",
            "order": 21,
            "type": "heading",
            "bbox": {
                "l": 52.32,
                "t": 175.44,
                "r": 185.28,
                "b": 165.12
            },
            "text": "INT 126: Motors and Controls",
            "attrs": {
                "block_label": "paragraph_title"
            },
            "level": 3
        },
        {
            "id": "p240.22",
            "order": 22,
            "type": "text",
            "bbox": {
                "l": 268.08,
                "t": 175.44,
                "r": 276,
                "b": 165.6
            },
            "text": "3"
        },
        {
            "id": "p240.23",
            "order": 23,
            "type": "text",
            "bbox": {
                "l": 51.6,
                "t": 163.68,
                "r": 282.48,
                "b": 140.64
            },
            "text": "Study of basic controls used today for AC motors. Ladder diagrams and practical circuits are drawn and wired."
        },
        {
            "id": "p240.24",
            "order": 24,
            "type": "heading",
            "bbox": {
                "l": 322.08,
                "t": 738.24,
                "r": 456.72,
                "b": 727.68
            },
            "text": "INT 128: Solid State Devices 3",
            "attrs": {
                "block_label": "paragraph_title"
            },
            "level": 3
        },
        {
            "id": "p240.25",
            "order": 25,
            "type": "text",
            "bbox": {
                "l": 321.12,
                "t": 726.72,
                "r": 551.52,
                "b": 680.88
            },
            "text": "A study of the characteristics and application of solid-state devices, diodes, transistors, rectifier circuits, voltage regulators, and wave-form interpretations. Single and multistate small signal amplifiers are tested."
        },
        {
            "id": "p240.26",
            "order": 26,
            "type": "text",
            "bbox": {
                "l": 321.6,
                "t": 669.12,
                "r": 546.48,
                "b": 635.76
            },
            "text": "INT 129: Large Scale Integrated Circuits 3\nPrerequisite: INT 130. Analysis of large scale integrated circuits. (Lecture two hour; laboratory two hours)"
        },
        {
            "id": "p240.27",
            "order": 27,
            "type": "heading",
            "bbox": {
                "l": 538.56,
                "t": 625.92,
                "r": 545.76,
                "b": 615.84
            },
            "text": "3",
            "attrs": {
                "block_label": "paragraph_title"
            },
            "level": 3
        },
        {
            "id": "p240.28",
            "order": 28,
            "type": "heading",
            "bbox": {
                "l": 322.08,
                "t": 625.44,
                "r": 460.08,
                "b": 614.64
            },
            "text": "INT 130: Digital Logic Circuits",
            "attrs": {
                "block_label": "paragraph_title"
            },
            "level": 3
        },
        {
            "id": "p240.29",
            "order": 29,
            "type": "text",
            "bbox": {
                "l": 321.84,
                "t": 613.92,
                "r": 546.96,
                "b": 590.64
            },
            "text": "A survey of logic circuits using Boolean Algebra, truth tables, and binary numbering systems."
        },
        {
            "id": "p240.30",
            "order": 30,
            "type": "heading",
            "bbox": {
                "l": 322.8,
                "t": 580.8,
                "r": 545.04,
                "b": 558
            },
            "text": "INT 136/CIT 136: Computer Hardware:\nManagement and Maintenance 3",
            "attrs": {
                "block_label": "paragraph_title"
            },
            "level": 3
        },
        {
            "id": "p240.31",
            "order": 31,
            "type": "text",
            "bbox": {
                "l": 320.88,
                "t": 557.76,
                "r": 556.8,
                "b": 455.76
            },
            "text": "The focus of this course involves emphasis on computer hardware that consumers of microcomputer systems might encounter. This course will guide students through the actual construction of a microcomputer system with in-depth discussions of each component and the various upgrade options. The use of peripheral devices such as fax, modem, printers, and scanners is also covered. The instructional methods employed in this class include lecture, class discussion, demonstration, and hands-on laboratory experience."
        },
        {
            "id": "p240.32",
            "order": 32,
            "type": "heading",
            "bbox": {
                "l": 322.08,
                "t": 445.44,
                "r": 535.92,
                "b": 422.88
            },
            "text": "INT 137/CIT 137: Computer Operating Systems: Management & Maintenance",
            "attrs": {
                "block_label": "paragraph_title"
            },
            "level": 3
        },
        {
            "id": "p240.33",
            "order": 33,
            "type": "heading",
            "bbox": {
                "l": 537.84,
                "t": 433.68,
                "r": 545.76,
                "b": 423.84
            },
            "text": "3",
            "attrs": {
                "block_label": "paragraph_title"
            },
            "level": 3
        },
        {
            "id": "p240.34",
            "order": 34,
            "type": "text",
            "bbox": {
                "l": 321.36,
                "t": 422.64,
                "r": 556.8,
                "b": 320.88
            },
            "text": "This course is designed as a survey of operating system software. Students will study the basic concepts and procedures for installing and troubleshooting operating system software. An emphasis on extensive laboratory experience will ensure students practice in addition to operating systems theory with DOS, Windows 9x; Windows NT, 2000, and XP; UNIX; Linux; OS/2; and Mac OS. The objectives of this course coincide with those needed in preparation for A+ software certification."
        },
        {
            "id": "p240.35",
            "order": 35,
            "type": "heading",
            "bbox": {
                "l": 322.32,
                "t": 310.32,
                "r": 460.08,
                "b": 299.76
            },
            "text": "INT 202: Technical Illustration",
            "attrs": {
                "block_label": "paragraph_title"
            },
            "level": 3
        },
        {
            "id": "p240.36",
            "order": 36,
            "type": "heading",
            "bbox": {
                "l": 538.56,
                "t": 310.08,
                "r": 545.76,
                "b": 300.72
            },
            "text": "3",
            "attrs": {
                "block_label": "paragraph_title"
            },
            "level": 3
        },
        {
            "id": "p240.37",
            "order": 37,
            "type": "text",
            "bbox": {
                "l": 321.6,
                "t": 298.56,
                "r": 554.4,
                "b": 252.72
            },
            "text": "Explores ways of converting orthographic projections into perspective and pictorial expressions. Emphasizes oblique, isometric, dimetric, trimetric, exploded view, and rendering of projections for publications."
        },
        {
            "id": "p240.38",
            "order": 38,
            "type": "heading",
            "bbox": {
                "l": 322.32,
                "t": 243.12,
                "r": 427.2,
                "b": 231.84
            },
            "text": "INT 203: Civil Drafting",
            "attrs": {
                "block_label": "paragraph_title"
            },
            "level": 3
        },
        {
            "id": "p240.39",
            "order": 39,
            "type": "heading",
            "bbox": {
                "l": 538.56,
                "t": 242.4,
                "r": 546,
                "b": 233.28
            },
            "text": "3",
            "attrs": {
                "block_label": "paragraph_title"
            },
            "level": 3
        },
        {
            "id": "p240.40",
            "order": 40,
            "type": "text",
            "bbox": {
                "l": 321.6,
                "t": 231.36,
                "r": 550.32,
                "b": 185.28
            },
            "text": "Study of special drafting processes including map drawing. Emphasis in planning earth and concrete retaining structures, projecting locations, profile line and grade, and surveying instruments."
        },
        {
            "id": "p240.41",
            "order": 41,
            "type": "heading",
            "bbox": {
                "l": 321.84,
                "t": 175.68,
                "r": 546.96,
                "b": 164.4
            },
            "text": "INT 208/CIT 208: Computer-Aided Drafting I 3",
            "attrs": {
                "block_label": "paragraph_title"
            },
            "level": 3
        },
        {
            "id": "p240.42",
            "order": 42,
            "type": "text",
            "bbox": {
                "l": 321.36,
                "t": 168,
                "r": 551.76,
                "b": 107.76
            },
            "text": "Prerequisite: INT 101 or consent of instructor. Familiarization with contemporary CAD systems, covering basic theory and applications, including industry's conversion to CAD. Prior computer experience is beneficial but not required."
        },
        {
            "id": "p240.43",
            "order": 43,
            "type": "footer",
            "bbox": {
                "l": 234.72,
                "t": 93.84,
                "r": 376.56,
                "b": 73.2
            },
            "text": "KSU CATALOGUE, 2009-2010\n229",
            "attrs": {
                "block_label": "footer"
            }
        }
    ],
    "excluded_furniture": {
        "first": [],
        "last": []
    }
}