{
    "document_id": 13892,
    "page": 16,
    "width_pt": 612,
    "height_pt": 792,
    "rotation": 0,
    "pipeline_version": "paddleocr-vl-1.6+paul-48",
    "engine": "paddleocr_vl",
    "source_run_id": 14003,
    "item_count": 15,
    "counts_by_type": {
        "figure": 1,
        "footer": 2,
        "header": 1,
        "heading": 2,
        "link": 4,
        "text": 5
    },
    "build_ms": 1,
    "items": [
        {
            "id": "p16.1",
            "order": 1,
            "type": "header",
            "bbox": {
                "l": 19.92,
                "t": 773.52,
                "r": 170.16,
                "b": 760.08
            },
            "text": "Kentucky State University",
            "attrs": {
                "block_label": "header"
            },
            "level": 2
        },
        {
            "id": "p16.2",
            "order": 2,
            "type": "heading",
            "bbox": {
                "l": 16.8,
                "t": 745.44,
                "r": 117.36,
                "b": 734.88
            },
            "text": "Student-to-Faculty Ratio",
            "attrs": {
                "block_label": "paragraph_title"
            },
            "level": 3
        },
        {
            "id": "p16.3",
            "order": 3,
            "type": "text",
            "bbox": {
                "l": 15.6,
                "t": 723.12,
                "r": 586.32,
                "b": 651.84
            },
            "text": "Institutions can provide their institution's student-to-faculty ratio (i.e., student-to-instructional staff) for undergraduate programs or follow the NCES guidance in calculating their student-to-faculty ratio, which is as follows: the number of FTE students (using Fall Enrollment survey component data) divided by total FTE instructional staff (using the total primarily instruction + instruction/research/public service staff reported in Human Resources survey component and adding any not primarily instructional staff that are teaching a credit course). For this calculation, FTE for students is equal to the number of the full-time students plus one-third the number of part-time students; FTE for instructional staff is similarly calculated. Students in \"stand-alone\" graduate or professional programs (such as, medicine, law, veterinary, dentistry, social work, or public health) and instructional staff teaching in these programs are excluded from the FTE calculations."
        },
        {
            "id": "p16.4",
            "order": 4,
            "type": "heading",
            "bbox": {
                "l": 16.8,
                "t": 637.68,
                "r": 119.76,
                "b": 626.88
            },
            "text": "Additional Resources",
            "attrs": {
                "block_label": "paragraph_title"
            },
            "level": 3
        },
        {
            "id": "p16.5",
            "order": 5,
            "type": "text",
            "bbox": {
                "l": 16.08,
                "t": 611.52,
                "r": 584.64,
                "b": 590.4
            },
            "text": "Additional information on the IPEDS survey components, including survey methodology, survey forms, and frequently asked questions, can be found at https://nces.ed.gov/ipeds/use-the-data/survey-components.",
            "children": [
                {
                    "id": "p16.5.1",
                    "order": 6,
                    "type": "link",
                    "bbox": {
                        "l": 67.57,
                        "t": 602.56,
                        "r": 304.83,
                        "b": 593.56
                    },
                    "text": "https://nces.ed.gov/ipeds/use-the-data/survey-components.",
                    "attrs": {
                        "uri": "https://nces.ed.gov/ipeds/use-the-data/survey-components",
                        "action_type": "/URI"
                    }
                }
            ]
        },
        {
            "id": "p16.6",
            "order": 7,
            "type": "text",
            "bbox": {
                "l": 16.08,
                "t": 579.84,
                "r": 484.8,
                "b": 558
            },
            "text": "Additional information on the timing of IPEDS data collection, data coverage, and data release cycle, can be found at https://nces.ed.gov/ipeds/use-the-data/timing-of-ipeds-data-collection.",
            "children": [
                {
                    "id": "p16.6.1",
                    "order": 8,
                    "type": "link",
                    "bbox": {
                        "l": 18.75,
                        "t": 570.47,
                        "r": 293.73,
                        "b": 561.47
                    },
                    "text": "https://nces.ed.gov/ipeds/use-the-data/timing-of-ipeds-data-collection.",
                    "attrs": {
                        "uri": "https://nces.ed.gov/ipeds/use-the-data/timing-of-ipeds-data-collection",
                        "action_type": "/URI"
                    }
                }
            ]
        },
        {
            "id": "p16.7",
            "order": 9,
            "type": "text",
            "bbox": {
                "l": 16.32,
                "t": 547.92,
                "r": 418.08,
                "b": 526.08
            },
            "text": "Additional definitions of variables used in this report can be found in the IPEDS glossary available at https://surveys.nces.ed.gov/ipeds/VisGlossaryAll.aspx.",
            "children": [
                {
                    "id": "p16.7.1",
                    "order": 10,
                    "type": "link",
                    "bbox": {
                        "l": 18.75,
                        "t": 538.37,
                        "r": 233.71,
                        "b": 529.37
                    },
                    "text": "https://surveys.nces.ed.gov/ipeds/VisGlossaryAll.aspx.",
                    "attrs": {
                        "uri": "https://surveys.nces.ed.gov/ipeds/VisGlossaryAll.aspx",
                        "action_type": "/URI"
                    }
                }
            ]
        },
        {
            "id": "p16.8",
            "order": 11,
            "type": "text",
            "bbox": {
                "l": 16.56,
                "t": 515.52,
                "r": 584.64,
                "b": 493.68
            },
            "text": "Additional resources on the IPEDS Data Feedback Report, including the instructions on creating a custom comparison report, FAQs, and video tutorials, can be found at https://nces.ed.gov/lpeds/Help/View/2.",
            "children": [
                {
                    "id": "p16.8.1",
                    "order": 12,
                    "type": "link",
                    "bbox": {
                        "l": 149.42,
                        "t": 506.28,
                        "r": 304.15,
                        "b": 497.28
                    },
                    "text": "https://nces.ed.gov/Ipeds/Help/View/2.",
                    "attrs": {
                        "uri": "https://nces.ed.gov/Ipeds/Help/View/2",
                        "action_type": "/URI"
                    }
                }
            ]
        },
        {
            "id": "p16.9",
            "order": 13,
            "type": "figure",
            "bbox": {
                "l": 18,
                "t": 494.83,
                "r": 588,
                "b": 44.83
            },
            "text": "",
            "attrs": {
                "source": "pdf_image"
            }
        },
        {
            "id": "p16.10",
            "order": 14,
            "type": "footer",
            "bbox": {
                "l": 19.44,
                "t": 42.48,
                "r": 167.76,
                "b": 31.92
            },
            "text": "IPEDS DATA FEEDBACK REPORT",
            "attrs": {
                "block_label": "footer"
            }
        },
        {
            "id": "p16.11",
            "order": 15,
            "type": "footer",
            "bbox": {
                "l": 297.12,
                "t": 28.8,
                "r": 309.84,
                "b": 18.72
            },
            "text": "16",
            "attrs": {
                "block_label": "number"
            }
        }
    ],
    "excluded_furniture": {
        "first": [],
        "last": []
    }
}